12V 24V Volt Linear Actuator with Remote for Solar Tracking System

China 12V 24V Volt Linear Actuator with Remote for Solar Tracking System, Find details about China Linear Actuator, Solar Tracking Linear Actuator from 12V 24V Volt Linear Actuator with Remote for Solar Tracking System

Basic Info.

Model NO.

HB-DJ817G

Trademark

Transport Package

Carton Box/Pollywood Box

Specification

Self-locking

Origin

China

HS Code

8501310000

Model NO.

HB-DJ817G

Trademark

Transport Package

Carton Box/Pollywood Box

Specification

Self-locking

Origin

China

HS Code

8501310000

Product Desciption

HB-DJ817G is heavy load design with ball screw high precision performance special for solar tracking use in hash envioements

PLS Know it is customized product ,stroke ,install size ,speed ,motor can be change according to requiement

There are 3 install method as following:
12V 24V Volt Linear Actuator with Remote for Solar Tracking System

12V 24V Volt Linear Actuator with Remote for Solar Tracking System

Features:
    Solar tracking system linear actuator dynamic Load 20000N,static load 60000N for centralized solar power plant, IP66 electric actuators with the capacity for massive wind and snow loads,24V DC motor Ball Screw type outdoor use Linear Actuator for Photovoltaic power station

1, Support DC permanent magnet brushed motor.
     2, Power supply voltage: 24 v.
     3, Speed range: 1-1.6mm/s.
     4, Max load: 20000 N.
     5, Applicable temperature: - 40 ºC - 65 ºC,
     6, Duty cycle: 50% at normal temperature.
     7,Signal feedback: Hall(Optional).
8, External Hall switch, adjustable stroke, reliable control.
     9, IP66 protection Grade for outdoor use.
    10, Long life high efficiency designed ball screw.
    11, High weather resistance bellows (Optional).

1-1 Transmission parameters of the codes
Code	VDC	No-load speed mm/s	No-load Current A	Load(push/pull)KN	Speed with load mm/s	Current with load A	single hall pulse/m
							1 pair of poles	4 pairs of poles
A	24V	1.6	1.3	20	1.3	3.6	25.2	100.8
B	24V	1.2	1.3	20	1	4	37.998	151.992

2-1 Product Selection Guide

Voltage	Speed	Stroke	Install Dimension	Rated Load	Front end	Rear End	Cable Lenth	Cable end	Hall
24VDC
1.2mm/s
1.6mm/s
150mm-1200mm
L(See 4-1,4-2)
20000N
∅25-rod end knuckle bearing
customize
See 4-1,4-2
1M
1.5M
2M
customize
Bonding tin bare wire(can customize connectors )
No hall sensor
2 hall sensors

Main test items and reference standards
No.	Test items	Standards	Notes
1	Simulated load life test	HB FACTORY STANDARD	20KN load, stroke 1m, duty cycle 30%, life test
2	Temperature cycling test	IEC60068-2-14	Low temperature: - 40 ºC± 2 ºC, high temperature: 65 ºC± 2 ºC, high and low temperature for 1 hour, 50 cycle times, full load.
3	Temperature shock test	IEC60068-2-14	Low temperature: - 40 ºC± 2 ºC, high temperature: 65 ºC± 2 ºC, 100 cycles.
4	Humidity storage test	IEC60068-2-3	Temperature 65 ºC± 2 ºC, temperature 95 ± 2% RH, 144H
5	High-temperature operation test	IEC60068-2-2	High temperature 65 ºC, load test
6	Low-temperature test	IEC60068-2-1	(- 40 ºC± 2 ºC) storage time 48 hours; full load operation
7	Mechanical vibration test	IEC60068-2-6	Sine wave, 10Hz ~ 200Hz (logarithmic sweep) scanning cycle 300s, test time 8h
8	Salt spray test	GB/T242317-2001	The appearance salt spray test needs more than 500h (NSS)
9	Protection level test	GB4208-93	The waterproof test box shall be used according to the gb4208-930 standard of shell protection grade
10	Static load test	HB FACTORY STANDARD	Use pressure sensor, industrial computer, cylinder test.
11	Cable thermal aging	GB2951.11-2008	The change of tensile strength and elongation is less than 15%
12	Low-temperature winding of the cable	GB2951.14-2008 ( 8.1)	(- 40 ºC), 4h after immersion in water 1000VAC / 5m, no breakdown
13	UV resistant	TOV2pfg1169-2007	60 ± 2W / m2, 300-400nm, 720h ,no crack

Why use linear actuator for solar tracking system
1.Cost is lower (not only for the metal structure,the linear actuator,and also the install labor cost etc.)
2. easy to maintain, install and replace, no need to remove any of the panels if need to replace
3. triangular structure is stronger than slew drive, no need damper as slew drive