Petrochemical Industry Seawater Desalination Plant Salt Water Vertical Turbine Pump
China Petrochemical Industry Seawater Desalination Plant Salt Water Vertical Turbine Pump, Find details about China Salt Water Pump, Fire Pump from Petrochemical Industry Seawater Desalination Plant Salt Water Vertical Turbine Pump
Basic Info.
Model NO.
VTP
Power
Electric
Start Up
Electric Pump
Type
Sea Water Pump
Application
Submersible Pump, Sewage Pump, Oil Transfer Pump, Chemical Pump
Industry
Industry
Media
Water
Performance
Wear Pump
Theory
Centrifugal Pump
OEM
Ok
Certificate
ISO 90001
Impeller
Centrifugal, Mixed
Drive
Motor, Engine
Plant
Black, Blue
Trademark
Tongke
Transport Package
Wooden-Case
Specification
DN50-DN1600
Origin
China
HS Code
8413709990
Model NO.
VTP
Power
Electric
Start Up
Electric Pump
Type
Sea Water Pump
Application
Submersible Pump, Sewage Pump, Oil Transfer Pump, Chemical Pump
Industry
Industry
Media
Water
Performance
Wear Pump
Theory
Centrifugal Pump
OEM
Ok
Certificate
ISO 90001
Impeller
Centrifugal, Mixed
Drive
Motor, Engine
Plant
Black, Blue
Trademark
Tongke
Transport Package
Wooden-Case
Specification
DN50-DN1600
Origin
China
HS Code
8413709990
Product Desciption
- Why choose us?
- Specialized production Manufactory for Vertical Turbine Pump
- Focus on technological innovation, Over Industry leading level
- Good experience at Domestic and oversea market
- Carefully paint for Good appearance
- Years of International service standards, Engineer one-to-one service
PRODUCT DESCRIPTION
This kind of vertical drainage pump is mainly used for pumping no corrosion, temperature less than 60 °C, suspended solids (not including fiber, the grits) less than 150 mg/L content of the sewage or waste water. LPT type vertical drainage pump is in LP type vertical water pumps, and on the basis of the increase and the collar, set the tube oil lubrication is water. Can smoke temperature below 60 °C, send to contain a certain solid grain (such as scrap iron and fine sand, coal, etc.) of sewage or waste water.
VTP series Long Shaft Electric Vertical Turbine Water pump
√ Corrosion resistance main part material, SKF bearing, thordon bearings suitable for sea water.
√ Excellent design for high Efficiency save energy for you.
√ Flexible installation method suitable for different site.
√ Stable running, Easy to install and maintain.
RUNNING DATA
| Capacity | 20-5000 m3/h |
| Head | 3-150 m |
| Working Temperature | 0-60 ºC |
| Power | 1.5-3400KW |
Application and purpose
Petrochemical Industry pump
Seawater desalination plant or salt water pump
Municipal engineering
City flood control and drainage
Industry plant
Industrial architecture
Sewage treatment engineering
PUMP ADVANTAGE
1.The inlet shall be vertical downward and the outlet horizontal above or under the base.
2.The impeller of pump is classified into enclosed type and half-opening type, and three adjustments: non-adjustable, semi adjustable and full adjustable. It is unnecessary to fill the water when the impellers are fully immersed in the pumped liquid.
3.On the basis o Pump, this type is additionally fit with muff armor tubing and the impellers are made of abrasive resistant material, widening the applicability of pump.
4.The connection of impeller shaft, transmission shaft, and motor shaft applies the shaft coupling nuts.
5.It applies water lubricating rubber bearing and packing seal.
6.The motor generally applies standard Y series tri-phase asynchronous motor, or YLB type tri-phase asynchronous motor as requested. When assembling Y type motor, the pump is designed with anti- reverse device, effectively avoiding reverse of pump.
More detail about our VTP series Long Shaft Vertical Turbine Pump for curve and dimension and data sheet please conatct Tongke.
Note before order
1.The temperature of medium shall not be higher than 60 .
2.The medium shall be neutral and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3.For VTP type pump, the content of suspended substances in the medium shall be less than 150 mg/L; for VTP type pump, the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4 VTP type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For two stage pump, lubricant pressure shall not be less than operational pressure.
PRODUCT SHOW
SAMPLE PROJECT
PROJECT NO.1
PROJECT NO.2 VTP pump for sea water plant
PROJECT NO.3 VTP pump for Petrochemical Works
PROJECT NO.4
You Might Also Like
Children′ S Bicycles 3-Year-Old Baby Bicycles 2-4-6-Ye......
Removable Plate Heat Exchanger with SS304 316L Plates
Automatic Parking Barrier Parking Position Lock
5 Axis CNC Precision Machining Vane Whee
Elite 24V 200ah Li-ion Phosphate Battery Green Energy LiFePO......
6015 Sculpture Art Wood Carving, Panel Automatic Cutting Mac......
13ft Folding Huge Outdoor Trampoline GS Certification
Wholesale Factory Made High Quality Hospital Bed Mattress To......
Four Color Polyester Film Flexographic Printing Machine
Zoomlion Bull Dozer O Ring 1081001402 for Zoomlion Bulldozer......
Diamond Drill