This Full face mask flame resistance tester is designed and producted according to EN 136 and GA 124-2013 latest version of the standard development.It meets the standard tool for back, back with a belt buckle, bottle protective cover and full face shield barrier combustion performance test.

The Full face mask fire resistance testing equipment is intelligent, touch-screen control system; the freedom to choose different samples of test procedures; and test results are automatically saved.

1, Cabinet of Full face mask fire resistance tester is painted, elegant appearance;
2, The full face mask and back strap with a combustion device with platform integration of structural design;
3, All toolings are made of stainless steel, appearance, corrosion resistance;
4, The Full face mask flame resistance tester has a pressure gauge and a pressure regulating valve;
5, Needle valve controls the flow rate of the burner gas ;
6, PLC and touch screen control systems; test interface is easy to operate;
7, The tester automatically timing, the heat data is automatically recorded and stored;

• Burning test private metal mould
1, Six imported burner nozzle, can control propane and air flow rate,
2, Burner nozzle height can be adjusted up and down; 250mm from the outer surface of the specimen,
3, Pressure gauge and regulator valve regulates the burner gas pressure in the range of 0 ~ 10kPa,
4, Gas automatic blocking device, which blocked gas supplies when the test is 5seconds,
6, Automatic ignition, switches off automatically after 5s ignition;
• Back with strap test section:
1, Stainless steel baffle plate, appearance and corrosion;
2, Imported Bunsen burner, gas and air flow rat

3, Torch lifting device; stainless steel sample holder;
4, Automatic timing;
5, Flame height is 40mm; the temperature at 20mm is 800 ± 50 ºC;
6,Aomatic ignition, turns off automatically after 20s ignition;

Factory overview

Transporation

FAQ
1.What's the delivery time?