Welded H Beam Assembly Line
Specification:
Automatic clamp and centralize the web and flange, alignment and welding, can improve the working efficiency by more one time than similar products. The main engine drive is controlled by imported AC frequency adjustor to make sure stable and reliable. There is pilot arc device to ensure welding quality.
The positioning of web and flange is realized with hydraulic drive, on the two sides, the mechanical clamping and centralizing is acted synchronously, to ensure web and flange positioning with various sizes within allowed range.
The automatic centralizing is accurate and needless to adjust each time(no center deviation wheel for minor adjustment). When assembling, there is automatic hydraulic holding frame which can go up and down, to make sure web and flange are in matched position. The upper beam has 4pairs of guide on the left and right to make sure stabilization.
The automatic welding system is driven by light cylinder without compressed air source. The inlet and outlet table roller and inlet tension rod are sectional type, and can add and remove according to customer need.
The main motor uses AC frequency transforming speed adjustor to control speed. The hydraulic system has standard products with precision filter, to ensure long life and stable function of magnetic valve.
Supply scope:
1, The main structure: main frame, upper gate frame, synchronous clamping and centralizing system of web and flange, main transmission motor reducer.
2, Inlet table roller system: active and passive table roller: 2.6m*3sets, tension rod: 3 sets.
3, Outlet table roller system: active and passive table roller: 2.6m*3sets.
4, Hydraulic system: oil bump station, high pressure rubber pipe, and hydraulic cylinder.
5, Electric control system: electric cabinet, AC frequency converter and etc.
Model | Z15 | Z18 | Z20 |
web height mm | 200-1500 | 200-1800 | 200-2000 |
web thickness mm | 6-32 |
web length mm | 4000-15000 |
flange width mm | 200-800 |
flange thickness mm | 6-40 |
assembly speed mm/min | 500-6000 |
feeding table roller mm | 2600×2 |
output table roller mm | 2600×2 |
centralized way | hydraulic link mechanism clamp, centralize and weld in the middle automaticly |
speed control | imported AC frequency adjustor stepless adjust |
input volumn | 16KVA exclude wellding power |
welding system | 2 sets of CO2 protecting welding machine |
Our company:
Jiangsu Yaoqiang Technical Group is a dealers holding type and high-tech enterprise. It mainly supply welding, cutting, milling, pipe producing production line as well as electrical automation equipment. The group consists of Jiangsu Silver Coast International Trading Development Co., Ltd (locate in Wuxi)& Dongtai Yaoqiang Mechinery Manufacture Co., Ltd. While Wuxi company, which is located in National technical industry park, i. e.The Wuxi Liandong U Valley, besides the Taihu lake with beautiful scenery and renowned humanities, is mainly focus on enterprise blue print, R&D, marketing,trading, management and finance. The Dongtai plant is devoted to technics, manufacture, process control, test and after-service, which locates at Dongtai Tangyang Xinhong Machinery industry park, in the wet land area off the seashore of Huanghai.
So we are manufacturer and trader. The Wuxi part is for trading and Dongtai part is for producing.
Here we make a promise to you all: we will offer you the products with the ideal price and good quality.
If you have any problems or you are interested in our products, Please contact me via Email or following ways:
Tel:0086-15261533318