Mini bamboo with capacity 400-700 kg per hour rice husk feed farm feeder

  Mini rice husk feed farm feeder, is widely used, the raw material of this pellet machine can be maize, soybean, rice, wheat etc, put these raw materials into the machine and you will directly get the inflating pellet which can be of different sizes and different shapes, after the material is sent into feeding device, they will be pressed by the screw shaft with high pressure and temperature which makes the raw material fully cooked and sterilized, then the pressed material will be formed into pellets by shaping mould, you can change different moulds to make pellets with different diameters, after that a cutting device will cut the formed pellets into different length as required.

  Mini rice husk feed pellet machine, can be used in different areas, such as animal feeding, heating of the buildings and th production of the manure, the major advantage of the pellets compared with the material, it can be easily handled, transported and stored for longer life, it is used for pressing materials such as grain, firework stalk, tree branches, wood meal, fruit hull, palm and tailing of cotton plant, and widely used for recycle of livestock farms, biomass fuel plant, power plant, wood processing plant, fertilizer plant, chemical plant, food plant and cotton plant.

Features of Mini rice husk feed farm feeder

1) Mini bamboo with capacity 400-700 kg per hour rice husk feed farm feeder.

2) The specifications of pellet can be adjusted by changing dies with different diameters and compression ratios.

3) The pellets have smooth surface, suitable density and higher curing degree.

4) This machine can make starch pasting, protein coagulating or denaturizing, and improve the nutritional quality of feed pellets, which is easy to digest and absorb, meanwhile kill the pathogenic germ and parasite.

5) The pellet machine has a compact structure, flexible movement and convenient operation, and four tires can be installed at the bottom of the particle machine.

6) Widely used, this pellet mill is not only used for feed and animal husbandry industry, but also used for fertilizer and biomass energy. it can be used for cattle, horses, sheep, livestock etc,chicken, pig, rabbit, duck, goose, fish, ostriches, camels, dove small plant breeding feed factory, and animal manure, sludge, biogas residue as organic fertilizer,inorganic fertilizer,compound fertilizer and other fertilizer granules.

7) The pellets that the machine produced with high hardness,smooth surface and internal curing degree more fully improved nutrients absorbing and can kill general pathogenic microorganism and parasite.

How to make your own pellets with our Mini bamboo with capacity 400-700 kg per hour rice husk feed farm feeder

The complete pellet making production line is composed the following steps.

Step1:Crushing

1) Before raw materials are made into biomass pellets of pellet machine, they are firstly reduced into smaller, uniform- sized particles. When the thickness is larger than 6 mm or size is greater than 50*50 mm, a pellet machine is needed to chip these materials into smaller pieces.

Step2:Drying

2) After all the raw material of pellet machine are crushed, dryer will be needed since for the most raw materials have the moisture content of about 50%.However, in general the optimal moisture content for pelletiztion is 10%-15%. Therefore, a rotary dryer is included in the pellet machine to reduce the moisture content.

Step3:Pelletizing

3) After crushing and drying all the raw materials properly, it is ready for the pellet machine. The pellet machine or press is the key piece of machine in the pellet plant. Pellet machine should be mentioned that impurities for the raw materials just like metal or stone, may damage the die and rollers of pellet machine.

Step4:Cooling

4) Usually after pelletizing, the temperature of pellet can reach almost 60-80 degrees, and also the moisture content is close to 15%. For storage purposes, a cooler must be used to reduce the surface temperature and moisture content.

Step5:Packing

5) Finally is the packing process of pellet making line. Inorder to protect the pellets from getting damaged and to increase storability, proper packing is necessary.