China High Quality Raw Material PP Resin for Homopolymer PP Pellet, Find details about China PP Resin, Resin from High Quality Raw Material PP Resin for Homopolymer PP Pellet
Port: | Tianjin, China
|
---|---|
Production Capacity: | 5000ton/Month |
Payment Terms: | T/T, Western Union, Paypal, Money Gram |
Color: | White |
---|---|
Transport Package: | 25kg/Bag |
Specification: | 25kg/bag |
Trademark: | AT |
Origin: | China |
Polypropylene
Polypropylene is a polymer formed by addition polymerization of propylene. It is a white waxy material with a transparent and light appearance. The chemical formula is (C3H6)n, the density is 0.89~0.91g/cm3, It is flammable, with a melting point of 189ºC, softening at about 155ºC, and the use temperature range is -30~140ºC . It is resistant to corrosion by acids, alkalis, salt solutions and a variety of organic solvents below 80°C, and can be decomposed under high temperature and oxidation.
PP Features
1. The relative density is small, only 0.89-0.91, which is one of the lightest varieties in plastics.
2, good mechanical properties, in addition to impact resistance, other mechanical properties are better than polyethylene, molding processing performance is good.
3. It has high heat resistance and the continuous use temperature can reach 110-120 °C.
4, good chemical properties, almost no water absorption, and does not react with most chemicals.
5, the texture is pure, non-toxic.
6, electrical insulation is good.
Number | Project | Unit | H40S | Test value | Test Methods | |
1 | Melt mass-flow rate(MFR) | Nominal value | g/10min | 37 | 37.3 | GB/T 3862 |
Deviation | ±37 | |||||
2 | Isotactic index | % | >=96.0 | 97.51 | GB/T 2412 | |
3 | Particle appearance | Color grain | Pc/kg | <=5 | 0 | SH/T 1541-2006 |
Black grain | Pc/kg | 0 | 0 | |||
Large and small grains | g/kg | <=100 | 0.1 | |||
Snake skin grains and trailing grains | Pc/kg | report | 25 | |||
4 | Impurities and others | Pc/kg | no | no | SH/T 1541-2006 | |
5 | Ash | % | <=0.030 | 0.014 | GB/T 9345.1 | |
6 | Tensile properties | Tensile modulus of elasticity(Et) | MPa | >=1200 | 1250 | GB/T 1040 |
Tensile yield stress(σ y) | MPa | >=30.0 | 30.9 | |||
Tensile stress atbreak(σ B) | MPa | >=8.0 | 20.7 | |||
Nominal tensile strain at break(ε tB) | % | >=200 | 566 | |||
Test conclusion | Qualified |
1.Fiber ( Carpet, Textiles, Upholstery, etc.)
2.Film ( shopping bags, casting film, multilayer film, etc.)
3.Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
4.Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
5.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture,Toys, etc.)
Our Main Products:
Our company's main products are plastic particles, including PP , LDPE , LLDPE , PC , PV , PET , HDPE ,PET , PS , EVA and so on. We have many years of production and sales history. Our service aim is to serve customers and win the market with quality.
Our products are produced on the basis of best technical team, advanced equipment, high qualified management which meet the requirements of security and environmental protection. We earned customer trust and created a good reputation during these years.
We will provide the most comprehensive products and service to you ! We are looking forward to your cooperation!
1.Can I get free sample?