Single Slope Roof Sandwich Panel Prefab House

China Single Slope Roof Sandwich Panel Prefab House, Find details about China Roof Panel, Sandwich Panel Homes from Single Slope Roof Sandwich Panel Prefab House

Model NO.
ZJT-AB92
Thickness
60/75/90/100/120/150/180mm
Panel Material
Nonmetal
Fireproof
3 Hours
Sound Insulation
>=42dB
Cpmpressive Strength
>=3.5MPa
Hang Force
>=1000n
Heat Transfer Coefficient
<=2.0W/M2.K
Environment Friendly
100% Non Asbestos
Moistureproof
General
Piping
Grooved After Installation
Environmental Evaluation
Clean
Wall
Solid Core
Method
Dry
Trademark
ZJT
Transport Package
Pallet+Pearl Wool+Corner Paper+Belt+Plast
Specification
EPS, Cement, Additives, Calcium Silicate Boards
Origin
Xiamen
HS Code
6810999000
Model NO.
ZJT-AB92
Thickness
60/75/90/100/120/150/180mm
Panel Material
Nonmetal
Fireproof
3 Hours
Sound Insulation
>=42dB
Cpmpressive Strength
>=3.5MPa
Hang Force
>=1000n
Heat Transfer Coefficient
<=2.0W/M2.K
Environment Friendly
100% Non Asbestos
Moistureproof
General
Piping
Grooved After Installation
Environmental Evaluation
Clean
Wall
Solid Core
Method
Dry
Trademark
ZJT
Transport Package
Pallet+Pearl Wool+Corner Paper+Belt+Plast
Specification
EPS, Cement, Additives, Calcium Silicate Boards
Origin
Xiamen
HS Code
6810999000
Single slope roof sandwich panel prefab house

Product profile

The composite wallboard is mainly made of special cement as gel raw material and mechanical pressing after adding a large amount of fly ash. The composite wallboard is different from the traditional building material, it has the advantages of environmental protection, small pollution, light weight, heat preservation and sound insulation, etc. The plate made can be assembled at will, and it is a kind of multifunctional wall material.

Single Slope Roof Sandwich Panel Prefab House

Single Slope Roof Sandwich Panel Prefab House

Face panel:5mm Calcium Silicate Boards

Interior Filling:EPS,Cement,Additives,Fly Ash


Product Specifications

Length:2270/2440mm  Width:610mm  Thickness:60/75/90/100/120/180mm
 
2270mm2440mmApplication
2270*610*60mm2440*610*60mmRoof
2270*610*75mm2440*610*75mmInterior Wall
2270*610*90mm2440*610*90mmInterior Wall
2270*610*100mm2440*610*100mmInterior Wall
2270*610*120mm2440*610*120mmExterior Wall/Floor
2270*610*150mm2440*610*150mmExterior Wall/Floor

Single Slope Roof Sandwich Panel Prefab House


Product Features

01.Hightlight the economic benefits,reduce project cost.
ZJT sandwich panel could optimize beam structures,adjust building layout and improve application performance.It has following economic advantages:save living space,fast construction,low labour cost and 70% of panel could be recyled.

02.Lightweight,Optimize structures
ZJT lightweight energy-saving sandwich panel,the weight for thickness 75mm is about 60KG/m2,the average weight for the panel is 60-800kg/m3,while the brick is 360kg/m2,the Autoclaved Aerated Concrete is 120kg/m2.

03.Space saving increase living space.

04.Sound insulation.
ZJT lightweight sandwich panels have good sound insulation,it is 40dB for 90mm thick wall and much better for thicker panels,the sound effects in the line with national residential sound requirements,much higher than other excuses brick wall of sound effects.

05.Easy to construct,transport and time saving.
According to many groups construction sites data,brick masonry construction capacity of 12 individuals for eight hours a day,if use ZJT wall panel in construction,three people could complete in 60 minutes,so efficiency advantage is very significant.

06.Earthquake resistance and impact resistance.
ZJT building materials can resist 8 intensity earthquake,whose seismic performance is 1.5 times that of the traditional wall materials.

07.Strong hanging force,can be slotted wiring and buried pipe.
By hanging test,the single point hanging force of wall panel can be up to 50kg and above level,and fully meet the wall of the general bearing applications,such as the installation of air-conditioning,condole ark,water heater,fixed,marble mesa skeleton support and so on.


Product Applications

One.Interior Wall

Single Slope Roof Sandwich Panel Prefab House



Two.Exterior Wall

Single Slope Roof Sandwich Panel Prefab House

Three.Floor

Single Slope Roof Sandwich Panel Prefab House


Four.Roof

Single Slope Roof Sandwich Panel Prefab House

Five.Schllo,Hotel,KTV,Hospital,Villa,etc.

Single Slope Roof Sandwich Panel Prefab House

 Manner of packing 


1.Free packing (with normal pallet and packing belt)
2.Standard exporting packing (wrapped with plastic thin film,edge protect and good pallet): USD20-30/Package 3.Packing size: 1500-3000*610*1000mm Loading: 18 pallets per 20' container, 11000kgs-18000kgs per 20' container


Single Slope Roof Sandwich Panel Prefab House

About us


Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture. 

Single Slope Roof Sandwich Panel Prefab House


Product Certificate


Single Slope Roof Sandwich Panel Prefab House

Single Slope Roof Sandwich Panel Prefab House

We can provide samples free of charge. Please feel free to contact us.



Contact us



Xiamen Zhongjingtai Building Materials Co., Ltd 
Unit2A, Lianchang Building, No6-8 Huli District, Xiamen, China

Contact person:Jodie Huang  

TEL: +86-592-5216902    FAX: +86-592-5216319  

Mobile : +86-13695041249 

   Website: zjteps.en.made-in-china.com