China 22 Cavity Injection Blow Molding Machine, Find details about China Stretch Blow Moulding Machine, Blow Molding Machine from 22 Cavity Injection Blow Molding Machine
Technical Parameters | |||
Preform system | Unit | STIBM95S | |
Screw diameter | mm | 65 | |
Screw L/D | L/D | 23:1 | |
Shot volume | cm3 | 660 | |
Injection weight(HDPE) | g | 625 | |
Max.Screw speed | rpm | 10-235 | |
Heating capacity | KW | 12.6 | |
No.of heating zone | Qty | 3+N | |
Clamping system | |||
Clamping force of preform | KN | 1008 | |
Clamping force of blowing | KN | 221 | |
Opening stroke of mold planten | mm | 160 | |
Lifting H of rotary table | mm | 80 | |
Max.Platen size(L×W) | mm | 900×480 | |
Min.mold thickness(H) | mm | 280 | |
Heating capacity of mould | KW | 8 | |
Stripping system | |||
Stripping stroke | mm | 260 | |
Dry cycle | sec | 3 | |
Driving system | |||
Motor power | KW | 26+26+3 | |
Hydraulic pressure | Mpa | 14 | |
Product range | |||
Suitable bottle range | ml | 5-800 | |
MAX.bottle height | mm | ≤220 | |
Max.Dia.of bottle | mm | ≤100 | |
Other | |||
Min.air pressure | Mpa | 1 | |
Discharge rate of compressed air | m3/mm | ≥1 | |
Water flowage | m3/h | 6 | |
() | Total rated power with mold heating | KW | 75.6 |
Dimension(L×W×H) | M | 5.0×2.0×2.6 | |
Net weinght | ton | 12 |
Name | Brand | |
1 | Electro-Hydraulic system | ++ INOVANCE controller+motor+SUMITOMO pump :++Or TECHMATION controller+PHASE motor+ECKERLE pump |
2 | Hydraulic motor | INTERMOT OR STF |
3 | Hydraulic valve | YUKEN |
4 | Seal Kit | COG,DINGZING,HALLITE |
5 | Accumulator | OLAER |
6 | Oil cooler | DELTA |
7 | High-pressure hose | EATON orCONTITEC orPARKER |
8 | Air Valve | SMCFESTO |
9 | Pneumatic connector | CAMOZZI |
10 | Control system | PLC+ OMRON+MCSG |
11 | A.C. Contactor | SCHNEIDER |
12 | Relay | , OMRON or SCHNEIDER |
13 | Promixity switch | OMRON |
14 | Linear Scale | GERFAN |