Plastic Hot Filling Bottles Blow Moulding Machines

ZQ-B1500-2 series full-automatic pet stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has two to three cavities and the maximum capacity of the products is 2.0L. It is special for hot filling bottles, which is made of plastic of crystalline type, such as PET and PP etc.

High pressure clamping system, with horizontal pressure and vertical locking system, will make sure of strong clamping force to prevent mould opening during heating process
Reduce inpulse force the bottom mould with control of right stretching position

Blow Moulding Technique
A). Preforms are heated by moving along the preheater and self-rotating. Temperature can be adjusted till it is suitable to blow.
B). Preform is tretched vertically and then horizontally, In the hot cavity. Bottle will be shaped by twice blowing treatment to make PET stay at the crystallzing temperature

Settings
A). PLC colour display: OMRON(Japan)
B). Pneumatic parts: FESTO(Germany)
C). Controller of preform transfer: Servo motor DELTA(TAIWAN)
D). Other electric parts are all world-famous brand

Plastic Hot Filling Bottles Blow Moulding Machines,Features
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: Automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: Less than 0.2 percent.

Plastic Hot Filling Bottles Blow Moulding Machines,equipment information.Note: The specifications are subject to change without notice for the further improvement.
Note: Custom production accepted. Any client idea tried.