Products

Rotary Metal Shaft Potentiometer

China Rotary Metal Shaft Potentiometer, Find details about China Rotary Potentiometer, Potentiometer from Rotary Metal Shaft Potentiometer

Model NO.
F081
Shape
Square
Resistance change scale
Linear Scale
Application
Audio
Origin
China
HS Code
8533400000
Model NO.
F081
Shape
Square
Resistance change scale
Linear Scale
Application
Audio
Origin
China
HS Code
8533400000
Product Introdution

F082 Series  
Metal shaft Potentiometer
 
1.Flux builded-up prevention is taken through inserting molding around the resistor with resin.
2.A large variety of products lined up to support various applications.
3.Dual Shaft and miniature design for audio applications.
4.Long Life Type Available

Electrical characteristics
Total Resistance 1KΩ~1MΩ
Resistance Tolerance500Ω<R<1MΩ:±20% R<=500Ω or R>=1MΩ:±30%
Resistance  linearity  A.B.C
Max. Operating Voltage AC 50V, DC 10V
Rated Power O.05W
Rotational Noise 100 mV Max
Insulation Resistance Less than 100MΩ at DC 250V
Withstand Voltage 1 minute at AC 300V
Residual Resistance 50Ω Max
Gang Error (Dual Unit or Multi-unit) -40db~Odb±3db
Mechanical characteristics
Detent 1(Center) detent, 11 detents
Total Rotational Angle 300°±1O°
Push-Pull Strength Pull: 10Kgf Min; Push: 10Kgf Min at 10sec
Rotational Torque 20-200gf.cm
Stopper Strength 3.0Kgf.cm Min
Shaft Wobble 0.5mm Max
Detent Torque 20 ~ 250gf.cm
Bushing nut tighten Strength 10.0Kgf.cm
Durability
Rotational Life Standard life: 30,000 Cycles Min.; Long life: 100,000 Cycles Min.
Cold Test -20±2°C for 96 hours. △TR< ±15% 
Dry Heat 70±2°C for 96 hours. △TR< ±15% 
Temperature Cycle -20~+70°C, 5 cycles. △TR< ±15% 
Soldering Condition Solder dip: 260±5°C 5 Sec; Manual Soldering: 350°C±10°C 3 Sec
Switch characteristics
Rated Power 3.0A at DC 16V
Contact Resistance Less than 50mΩ
Switch Angle 30°±1O°
Switch Torque 50~250gf.cm
Switch Life 25,000 cycles at without load

Rotary Metal Shaft Potentiometer
 

You Might Also Like