M. S SS Plate Profile Cutting Machine with best terms can be applied in lot size straight steel plate cutting, as well as various geometric shape cutting.
The main frame is annealed to remove the stress, stable and endurable. The servo motor, reducer, pressure release valve, air pipe and magnetic valve as well as cutting gun used are all world famous brand to ensure excellent performance.

The CNC cutting machine uses imported AC motor, and driven with imported bevel gear reducer. With precision gear and rack move, to ensure stable function. Air cutting speed is adjusted by frequency transformer. The air source control box on the main engine can adjust air pressure from every tunnel easily. All the pressure adjusting valve and main air pipe are original imported. Pipe and wire on the broadwise cutting gun all use imported supporting chain, safe and neat.

Brief Introduction:
1. The CNC flame cutting machine is guide rail fixed, gantry gate move type;
2. The flame cutting guns will cut the flange and web of H beam;
3. Cross arm operation accuracy is within 0.5mm/m;
4. Oxy and acetylene or oxy and acetonum gas as fuel source;
5. Guide rail length is 14M*2PCS;
6. X axis Panasonic servo and pilot reducer driven, Y axis Panasonic servo and pilot reducer driven;
7. CNC system: Hypertherm EDGE

Supply scope:
Frame unit: Beam, pipe, broadwise beam and longitude and broadwise reducer and etc.
Track unit: Guide and accessories. The guide size is 14m*2PCS.
Cutting torch unit: Linear single cutting gun*10PCS and accessories.
Electric control system: Electric control cabinet, longitude and broadwise motors and accessories.
Gas source unit: Main air rubber pipe, suspending sliding vehicle and etc.
Spare parts: 1 setCNC flame/plasma gas cutting machine can be applied in lot size steel sheet straight cutting, as well as irregular geometric shape cutting. The main frame is annealed to remove stress, stable and anti-weary. The servo motor, reducer, pressure release valve, air pipe, magnetic valve as well as cutting guns used are all world famous brand to ensure excellent cutting performance.

Specification:
The cutting machine uses imported AC motor, and driven with imported bevel gear reducer. With precision gear and rack move, to ensure stable function. Air cutting speed is adjusted by frequency transformer. The air source control box on the main engine can adjust air pressure from every tunnel easily. All the pressure adjusting valve and main air pipe are original imported. Pipe and wire on the broadwise cutting gun all use imported supporting chain, safe and neat.


Supply scope:
1,Frame unit: Beam, pipe, broadwise beam and longitude and broadwise reducer and etc.
2,Track unit: Guide and accessories. The guide size is 14m*2PCS.
3,Cutting gun unit: Linear single cutting gun*10PCS and accessories.
4,Electric control system: Electric control cabinet, longitude and broadwise motors and accessories.
5,Gas source unit: Main air rubber pipe, suspending sliding vehicle and etc.
6,Spare parts: 1 set

Documents with goods:
1, Instructions including map of electricity and gas.
2, Certificate
3, Packing list
4, On site installation drawing for laying foundations.

Contact:
 
Website: http://yaoqiangwelding.en.made-in-china.com  | http://yaoqiangwelding.en.made-in-china.com | http://yaoqiangwelding.en.made-in-china.com
Dongtai Yaoqiang Machinery Manufacture Co.,Ltd | Factory Addr.:  Tangyang Town, Dongtai Yancheng city, Jiangsu, China
Jiangsu Silver Coast International Trade Development Co.,Ltd | Sales  Office:  #39 Liandong U Valley,Wuxi city,Jiangsu,China

Equipment quality and after-service commitment: 
1. All the products our company produced are compliant to national and enterprises standard.
2. Our products should meet all the technical requirement and parameters, and ensure the safe and stable function.
3. We will send workers to the working site of the buyer for engaging in and instructing the installation and test, until the equipment is ready for use. We also train the equipment operator and maintenance staff for user.
4. The equipment guarantee period is one year. During this period, for the breakdown not caused by mis-operation by user, we will be responsible for repair and replace.
5. After the guarantee period, our companies will provide maintenance service and spare parts at low cost.









 

FAQ:
Q1: I knew nothing about this machine, how am i know this machine will meet my working needs?
Please tell us your workpiece size or show specific drawings, we will give you professional solutions.
Q2: When I got this machine, but I don't know how to use it. What should I do?
We provide overseas service and English manual, after installation, if any problems happen, we offer the remote video guidance and charging overseas service.
Q3: If some problems happen to this machine during warranty period, what should I do?
Contact us directly, we will supply free parts during machine warranty period. While we also supply free life long after-sales service.
Q4: If i want visit your factory, how can i get?
Company address:39#, Liandong U business park, Wuxi city, Jiangsu, China
Factory address:Xinhong Industrial Park, Dongtai Yancheng City, Jiangsu, China
1), Visa: if u need get a government visa, pls pay 20%(at least) prepayment for new customer. Wuxi government regulations. Thanks for support.
2), By train: Wuxi station. By air: Wuxi Shuofang Airport. We will drive u to our factory. 180km between Wuxi and Yancheng city. 
Q5: Why your sales office at Wuxi, but your factory located at Yancheng?
10 years ago. In response to the Yancheng government investment invitation, our leader moved the factory from Wuxi to Yancheng, purchased 15,000 square meters of land and built factories. In order to reduce production costs and sustainable development.
Tips: At present, the Jiangsu government is building the provincial high-speed railway. It is expected that Yancheng will open the subway in 2022.