2.It adopts die-casting aluminum, the surface is subjected to special oxidation treatment and heat conduction treatment, which can improve the heat generated by the lamp board and the power source of the lamp to be quickly exported to the outside of the lamp, reduce the temperature difference, reduce the junction temperature of the light source, and ensure the light source light decay by 3%,Life expectancy of 40,000 hours;

3.Constant current power supply, high efficiency, low heat, high constant current accuracy; unique structure, high efficiency, energy saving, green and environmental protection.

• Can identify day and night automatically: when turn to SUN (max), it will work day and night, when turn it to MOON (min), it will only work in the ambient light less than 10LUX. As for adjustment, please refer to testing way.
• SENS adjustable: It can be adjusted according to using location; low sensitivity for small room and high sensitivity fits for large room.
• Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basis (set time).
• Time-delay is adjustable: It can be set according to your desire, the minimum is 5sec, and the maximum is 8min.

• Slide the LUX   switch to SUN position (like the PIC. below is SUN). Adjust the TIME switch, slide 5" switch to ON position. (slide upwards).5 secs to 8min adjustable.
• When you switch on the power, and preheat 30 seconds later, the load is turned on, in the absence of no inductor signals, the load should be stopped working within 5-30sec.
• After the first is out, make it sense again after 5~10sec. The load should work. When there is no inductor signals in the indicator lamp, the load should be stopped working within 5sec.
• Slide the LUX switch to MOON position; it is in 10LUX, the load should be not work in the daylight. If you cover the detection window with the opaque objects (towel etc), the load work .under no induction signal condition, the load should stop working within 5-15sec.
• Slide the LUX to "8"switch, the sensor will not work.( says the light can work without sensor.)

Application:
Widely used in square, plaza, garden, lawn, playground, tennis stadium, golf course, bus station, airport, sculpture, architecture, tunnel, arts work, street, show room, parking lot etc.
 

Our workshop:
We have 6 production lines at production department, including assembling, inspection and aging test lines.
Production ability:  3-5 days for 500pcs LED Flood light, and 10-15 working days for 3000pcs LED Flood Light at common requirements.