Basic Info.

Model NO.

AEB-60

Model NO.

AEB-60

Product Desciption

    Absorber agitator in large thermal power plant is a key equipment in flue gas desulfurization plant, which has high requirements for its reliability and service life. more than half of the electrical energy consumed by the FGD device is used to drive the absorber circulating pump and agitator. Therefore, the agitator should have high efficiency. The quality of mechanical seal, the design of structure and the selection of material of over-flow parts are directly related to the efficiency, reliability and service life of pump operation.
limestone powder is added to water to make slurry as absorbent pump into the absorption tower and fully contact with the flue gas. the SO2 in the flue gas is oxidized with calcium carbonate in the slurry and the air pumped into the lower part of the tower to form calcium sulfate. after calcium sulfate reaches a certain saturation, it crystallizes to form dihydrate gypsum. The gypsum slurry discharged through the absorption tower is concentrated and dehydrated so that its water content is less than 10%, and then sent to the gypsum storage bin for stacking by the conveyor. The flue gas after desulphurization is removed by the mist remover, and then heated and heated by the heat exchanger, and then discharged into the atmosphere by the chimney. The mechanical seal of LIGHTNIN absorption tower AEB-80/AEB-100/AEB-120 agitator in the United States is mainly used on the side mixer of the absorption tower in the flue gas desulfurization unit of coal-fired power generation, and can also be used on the reactor in chemical, paper-making and other industries. This seal can completely replace the JOHN CRANET mechanical seal on LIGHNIN American imported agitator
 Common equipment model: VSF-7.5,1VSF-15,1VSF-18.5,1VSF-22,2VSF-22,2VSF-30 1 2VSF-37 2VSF-45,2VSF-55
Common Seal Type: AEB-60,AEB-80AEB-100AEB-120AEB/70-M2-201AEB/75-M2-201
 AEB/65-M2-201AEB/60-M2-201
Main parameters:
Specification :60 mm~120 mm
Pressure :0~1.5 Mpa
Temperature :0ºC~180ºC
Line speed :≤10 m/min
Suitable medium: medium with high impurity content such as gypsum and lime slurry.
Product characteristics
Close cover: graphite, cemented carbide, silicon carbide
Auxiliary sealing: nitrile, ethylene propylene, fluorine rubber, silica gel, etc.
Metal component: L,2205,2507 316
Structural characteristics: single end surface assembled with bearing mechanical seal.The internal working length is short, easy to install and easy to use. Equilibrium type, arbitrary rotation.Static ring compensation multi-spring external non-contact medium