5L PET Bottle Purified Water Filling Capping Machine

Decription

1.When the bottles straight from the chain of humanitarian sent to the first machine rinser; the machine in motion, in the Under the action of cam, so that folder open bottle clip and contraction of the bottle rotated 180 degrees for washing and disinfection.

2.Continue to operate, the bottle returned to the original point of view. And the open clip, under the influence of the bottle in the Jog Dial to enter delivery systems. Then transported to the filling machine parts, filling machine parts has a photoelectric detection, when the bottle is only through the Ba, the optical data into information to the PLC, PLC had instructed the cylinder block to block bottles .

3.Also, bottle filling machine rear cylinder block has also played, keep an empty bottle into the capping machine. Under the action of the program, filling the cylinder downward movement, so that within the filling valve into the bottle filling, until a certain time to stop filling, the cylinder block bottles back. Filled bottle into the capping machine, capping machine from the rack, the justifications for cover device, and even the composition of gland. Gland it is connected to the horizontal section of the dump under a certain angle, the constant movement when the bottle, put on caps. Then, the bottles with catchy article closely aligns with the gland, gland play a role.






Details

a) Washing Part
4 bottles are running on the conveyer belt with photo electricity, the bottle cylinder will go out, meanwhile push the bottle into bottle support ring, and bottle neck support catch the bottle neck, then main shaft turned 180degree under gear wheel. Let bottle's mouth face to land, jetting water into bottle, after a few seconds, the main shaft will be back, then finishing the washing.


b) Filling Part
The machine is composed water/juice tank, float ball, shaft, filling valve, Pneumatic component, electric machine. Washing finished bottle is conveyed into filling position, cylinder push and hold the plate which can hitch bottles, the mouth of bottle can open the valve, finishing filling,plate which can hitching bottle will running down, the valve will closed automatically, the time lasting of filling can be adjusted .


c) Capping Part
The working is intermission when running. There are six positions for capping, and have 1 capping head, can automatically capping. The capper will be screw type with 3 start neck finish.



 
Flat conveyor(Free of charge)


PLC Control



Linear Style 5L Automatic Water Filling Machine For Drinking Water With 400-1000BPH Capacity

Parameter
 

Besides,I think this information you will be interested in:

1.Min order: 1 set machine

2.Installment:If you needed, We will send technicians to the factory after preparation work is completed.

3.New Service:
  a. 5 years of after-sales tracking: the first year is free, and the service fee will be charged in the second year;
  b.  If you need it, you can let your engineers come to our factory for free training.
  c.  If it is a larger production line, let our engineers go to your factory for advice.
  d.  Provide expert one-on-one service.