TISCO 430 stainless steel coil/roll
Hot Rolled & Cold Rolled Stainless Steel Coil, Steel Sheet, Steel Strip, Antiskid Steel Sheet,
Color-Ti Steel Sheet. Etc.
Steel Grade:
200 series: 201, 202
300 series: 304, 304L, 309S, 310S, 316L, 316Ti, 321
400 series: 409, 409L, 410, 410S, 420, 420J1, 430, 444, 446, 439
900 series: 904L
Duplex steel: 2205, S32304, S31500, S31803/S32205, S32900, S31260, S32750, S32550.
Other: 0Cr13, 1Cr13, 1Cr17, 2Cr13, 3Cr12, 3Cr13.
Finish: No. 1, 2B, BA, HL, No. 4, No. 8, 8K Mirror, SB, Etching, Antiskid etc.
Size: Thickness: 0.01~300 mm
Width: 5~1800 mm, regular width=1000mm, 1219mm, 1500mm, slit edge
Length: According to customer's requirement, regular length=2000mm, 3000mm, 6000mm etc.
According to your customer's requirements.
Mill Name: Tisco, Lisco, ZPCC, Baosteel, Shousteel, Ansteel, Wuhangsteel etc.
Delivery time: 5 days after receive the deposit.
MOQ: 1 ton for sheet, 3 tons for coil
Package
Bundles, seaworthy wooden cases. With or without edge protector, steel hoop and seals, or as per customers' requirements.
The inner size of container is below:
20ft GP: 5.8m(length) X 2.13m(width) X 2.18m(high) about 24-26CBM, 23MTS
4 0ft GP: 11.8m(length) X 2.13m(width) X 2.18m(high) about 54CBM, 27MTS
40ft HG: 11.8m(length) X 2.13m(width) X 2.72m(high) about 68CBM, 27MTS
Payment term: L/C at sight or 30% TT as deposit and the balance paid against copy of B/L
Applications
Architectural decoration, luxury doors, elevators decorating, metal tank shell, ship building, decorated inside the train, as well as outdoor works, advertising nameplate, the ceiling and cabinets, aisle panels, screen, the tunnel project, hotels, guest houses, entertainment place, kitchen equipment, light industrial and others.
Advantages
Showing the splendor of your quality, wear-resistant as well, strong corrosion resistance and decorative effect, durable and beartiful in good taste.
No. 1 Finish
Hot rolled, annealed and discased. Produced by hot rolling followed by annealing and resealing. Generally used in industrial applications, such as for heat or corrosion resistance, where smoothness offinish is not of particular importance.
No. 2B Finish
A bright cold rolled finish commonly produced in the same manner as No. 2D, except twattle annealed and resealed sheet receives a finalxlight cold rolled pass on polished rolls. This is a general purpose cold rolled finish. It II-commonly used for all but exceptionally difficult deep drawing applications. This finish is more readily polished than No. 1 or No. Ad Finish.
No. 4 Finish
Is a general purpose polished finish widely used for restaurant equipment, kitchen equipmentstorefronts, dairy equipment Mc. Following initial grinding with coarserabrasives, sheets are generally finished last with abrasives approximately 120 to 154 mesh.
No. 8 Finish
Is the most reflective finish that is commonly produced. It is obtained by polishing with successively finer abrasives and buffing extensively with very fine buffing rouges. The surface is essentially free of grit lines from preliminary grinding operations. This finish is most widely used for press plates, as well as for small mirrors and reflectors.
HL Finish
Polished with abrasive belt of grit #150-#320 on the NO. 4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc.
BA Finish
Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc.
8K/mirror Finish
The product have excellent brightness and prefer reflexivity can to be the mirror.
|
Standard Name |
Chemical Composition |
Mechanical Properties |
|
JIS |
GB |
AIST |
EN |
C |
Si |
Mn |
P |
S |
Ni |
Cr |
Others |
Yield Strength |
Tensile |
Elongation |
Hardness |
|
UNS |
max |
max |
max |
max |
max |
max |
N/mm2 |
N/mm2 |
% |
HV |
HRB |
|
Austenitic stainless steels |
|
SUS201 |
1Cr17Mn6Ni5N |
201 |
** |
0.15 |
1 |
5.50-7.50 |
0.06 |
0.03 |
1 |
16.00-18.00 |
N0.25 |
245 |
640 |
40 |
253 |
100 |
|
SUS202 |
1Cr18Mn8Ni5N |
202 |
** |
0.15 |
1 |
7.50-10.00 |
0.06 |
0.03 |
4.00-6.00 |
17.00-19.00 |
N0.25 |
245 |
590 |
40 |
218 |
95 |
|
SUS301 |
1Cr17Ni7 |
301 |
1.431 |
0.15 |
1 |
2 |
0.045 |
0.03 |
6.00-8.00 |
16.00-18.00 |
_ |
≥ 205 |
≥ 520 |
≥ 40 |
≤ 218 |
≤ 95 |
|
SUS301L |
00Cr17Ni7 |
301L |
1.4318 |
0.03 |
1 |
2 |
0.045 |
0.03 |
6.00-8.00 |
16.00-18.00 |
N : 0.20 |
≥ 215 |
≥ 550 |
≥ 45 |
≤ 218 |
≤ 95 |
|
SUS304 |
0Cr18Ni9 |
304 |
1.4301 |
0.08 |
1 |
2 |
0.045 |
0.03 |
8.0-10.50 |
18.00-20.00 |
_ |
≥ 205 |
≥ 520 |
≥ 40 |
≤ 200 |
≤ 90 |
|
SUS304L |
00Cr19Ni10 |
304L |
1.4307 |
0.03 |
1 |
2 |
0.045 |
0.03 |
9.00-13.00 |
18.00-20.00 |
_ |
≥ 175 |
≥ 480 |
≥ 40 |
≤ 200 |
≤ 90 |
|
SUS304CU |
0Cr18Ni9 |
304 |
1.4301 |
0.08 |
1 |
2 |
0.045 |
0.03 |
8.00-10.50 |
18.00-20.00 |
CU : 0.70-1.30 |
≥ 205 |
≥ 520 |
≥ 40 |
≤ 200 |
≤ 90 |
|
SUS304Ni8.5 |
0Cr18Ni9 |
304 |
1.4301 |
0.08 |
1 |
2 |
0.045 |
0.03 |
8.50-10.50 |
18.00-20.00 |
_ |
≥ 205 |
≥ 520 |
≥ 40 |
≤ 200 |
≤ 90 |
|
SUS304Ni9 |
0Cr18Ni9 |
304 |
1.4301 |
0.08 |
1 |
2 |
0.045 |
0.03 |
9.00-10.50 |
18.00-20.00 |
_ |
≥ 205 |
≥ 520 |
≥ 40 |
≤ 200 |
≤ 90 |
|
SUS316 |
0Cr17Ni12Mo2 |
316 |
1.4401 |
0.08 |
1 |
2 |
0.045 |
0.03 |
10.00-14.00 |
16.00-18.00 |
Mo : 2.00-3.00 |
≥ 205 |
≥ 520 |
≥ 40 |
≤ 200 |
≤ 90 |
|
SUS316L |
00Cr17Ni14Mo2 |
316L |
1.4404 |
0.03 |
1 |
2 |
0.045 |
0.03 |
10.00-14.00 |
16.00-18.00 |
Mo : 2.00-3.00 |
≥ 175 |
≥ 480 |
≥ 40 |
≤ 200 |
≤ 90 |
|
SUS321 |
0Cr18Ni10Ti |
321 |
1.4541 |
0.08 |
1 |
2 |
0.045 |
0.03 |
9.00-13.00 |
17.00-19.00 |
Ti : 5*C% |
≥ 205 |
≥ 520 |
≥ 40 |
≤ 200 |
≤ 90 |
|
SUS309S |
0Cr23Ni13 |
309S |
1.4833 |
0.08 |
1 |
2 |
0.045 |
0.03 |
12.00-15.00 |
22.00-24.00 |
_ |
≥ 205 |
≥ 520 |
≥ 40 |
≤ 200 |
≤ 90 |
|
SUS310S |
0Cr25Ni20 |
310S |
1.4845 |
0.08 |
1.5 |
2 |
0.045 |
0.03 |
19.00-22.00 |
24.00-26.00 |
_ |
≥ 205 |
≥ 520 |
≥ 40 |
≤ 200 |
≤ 90 |