Self adhesive bitumen/self adhesive asphalt waterproof membrane 
Brand" STAR FORCE" SBS flexible modified asphalt waterproof membrane use  SBS (styrene-butadiene-styrene) thermoplastic elastomer modified asphalt as dip-coating material, with high-quality polyester felt, glass fiber felt, glass fiber reinforced polyester felt as base material, using fine sand, mineral pellets, PE film, aluminum film, etc as release liner, the SBS flexible modified asphalt waterproof membrane agitated and ground by special machine.
  

Features:
   1) Safe, easy and fast installation, no naked flame, no binder, no pollution.
   2) Excellent adhesive performance, self-healed property.
   3) Anti-puncture, anti-tension, good elongation, anti-corrosion.
   4) Good flexibility under low temperature.
   5) Widened membranes can reduce loss.

Application:
   1) Industrial and civil building roofing, underground, pool, tunnel, wooden and metal roofing.
   2) Especially in the chemical factory, garment factory, and granary.
   3) Tape can be used for sealing all construction material
   4) Waterproof treatment of structural construction joints, overlap sealing of polymer waterproof membrane.



Construction Method:
  Step1: Ensure all surface are clean,dry and dust-free. Remove any loose particles and any rust with a wire brush & soft broom.
   Step2: Roll out the membrane.
   Step3: Remove the backing paper and place the adhesive side to the previously prepared surface.
   Step4: To ensure a tight contact-smooth the tape down with a dry cloth, remocing all the air bubbles;
   Step5: Press the tape to the surface firmly once in position.
   Step6: Smooth flat all edages with a wallpaper roller or trowel.
   Step7: After use reseal pack and store upright in cool,dry condition.

Storage and Transportation:
   1) Separate storage for different models.
   2) Temperature should be below 50 ºC.
   3) Avoid direct sunshine, rain, keep ventilated.
   4) Do not piled horizontally, keep stand vertically and not more than 2 floors.





Certificates: