Polyurethane Foam Waterproof Acrylic Spray Paint Gamazine Wall Coating Materials Liquid Waterproof Membrane
China Polyurethane Foam Waterproof Acrylic Spray Paint Gamazine Wall Coating Materials Liquid Waterproof Membrane, Find details about China Polyurethane Liquid Coating, Polyurethane Coating Liquid from Polyurethane Foam Waterproof Acrylic Spray Paint Gamazine Wall Coating Materials Liquid Waterproof Membrane
Basic Info.
Function
Waterproof
Certification
ISO
Color
Black
Usage
Outdoor
Trademark
BAIZHOU
Transport Package
Drums
Origin
China
Function
Waterproof
Certification
ISO
Color
Black
Usage
Outdoor
Trademark
BAIZHOU
Transport Package
Drums
Origin
China
Product Desciption
Polyurethane Foam Waterproof Acrylic Spray Paint Gamazine Wall Coating Materials Liquid Waterproof Membrane
1.Pictures of product
2.Characteristics
Grade I/II:
3.Advantage
4.Construction Requirement
Basic requirements rigid smooth without sundry, interna angle and external angle to make circular arc, the diameter of internal angle greater than 50mm, the diameter of external angle ia more than 10mm
Large waterproof construction: hybrid coating rubber or plastic scraper uniform coating for thickness is consistent, general of 1.5 mm to 2.0 mm, appropriate is three to four times after brush, brush time should be in previous besmear brushs curing film, and the vertical direction is generally brushed, separate film, underground engineering floor should increase spread a layer of fetal body reinforcing material.
Coating thickness: underground engineering 1.2 2.0 mm, the general should be 1.5 mm, lavatory bath room should not be less than 1.5 mm, exposed roof engineering using multichannel waterproof, each thickness not less than 1.2 mm, the waterproof grade III roof a fortification, waterproof thickness not less than 2 mm, between the coating and spread tire body reinforced material, tire body the following coating thickness not less than 1.0 mm, top coating not less than 0.5 mm
Act the role of facing construction: in the brush real last side coating not before curing surface dilute and clean grains of sand
Cover: coated membrane surface should be according to the design requirements for isolation protection.
11. Why choose us?
12. Welcome to contacting us.
1.Pictures of product
2.Characteristics
Grade I/II:
| Tensile strength / MPa >= | 1.90 | |
| Elongation at break / % >= | 550 | |
| Tearing strength/(N/mm) >= | 12 | |
| Foldability at low temperature / ºC <= | -40ºC | |
| Watertightness 0.3MPa 30min | Water resistant | |
| Solids content / % >= | 80 | |
| Surface drying time / h <= | 12 | |
| Hard dring time / h <= | 24 | |
| Heating expansion rate / % | <= | 1.0 |
| >= | -4.0 | |
| Aging property | Heat aging | No crack and deformation |
| Artificial weathering aging | No crack and deformation | |
| Tensile strength / MPa >= | 2.45 | |
| Elongation at break / % >= | 450 | |
| Tearing strength/(N/mm) >= | 14 | |
| Foldability at low temperature / ºC <= | -40ºC | |
| Watertightness 0.3MPa 30min | Water resistant | |
| Solids content / % >= | 80 | |
| Surface drying time / h <= | 12 | |
| Hard dring time / h <= | 24 | |
| Heating expansion rate / % | <= | 1.0 |
| >= | -4.0 | |
| Aging property | Heat aging | No fault and deformation |
| Artificial weathering aging | No fault and deformation | |
3.Advantage
4.Construction Requirement
Basic requirements rigid smooth without sundry, interna angle and external angle to make circular arc, the diameter of internal angle greater than 50mm, the diameter of external angle ia more than 10mm
Large waterproof construction: hybrid coating rubber or plastic scraper uniform coating for thickness is consistent, general of 1.5 mm to 2.0 mm, appropriate is three to four times after brush, brush time should be in previous besmear brushs curing film, and the vertical direction is generally brushed, separate film, underground engineering floor should increase spread a layer of fetal body reinforcing material.
Coating thickness: underground engineering 1.2 2.0 mm, the general should be 1.5 mm, lavatory bath room should not be less than 1.5 mm, exposed roof engineering using multichannel waterproof, each thickness not less than 1.2 mm, the waterproof grade III roof a fortification, waterproof thickness not less than 2 mm, between the coating and spread tire body reinforced material, tire body the following coating thickness not less than 1.0 mm, top coating not less than 0.5 mm
Act the role of facing construction: in the brush real last side coating not before curing surface dilute and clean grains of sand
Cover: coated membrane surface should be according to the design requirements for isolation protection.
5.Attention:
Remove the water, oil, dirt on the base before use;
Bonding base surface should be dry, moisture content 8%;
Tape should be stored in dry and shade places, avoid heat source, avoid direct sun and rain
The product is self-adhesive materials, should stick on the right place in one time, unfavorable to reuse;Forspecial use tape, please contact us
6.General painting construction method, this method is suitable for the overall waterproofing of roofs, exterior walls, etc., as well as the construction of small cracks and cracks. It can be used immediately after opening the cover, and the construction is simple
7.Repairing large cracks, expansion joints, etc. This method is suitable for waterproofing and repairing large cracks in the roof, expansion joints and the joints of buildings.
8.The cured film is smooth and free of impurities
9.Packing and delivery
10.Production line Bonding base surface should be dry, moisture content 8%;
Tape should be stored in dry and shade places, avoid heat source, avoid direct sun and rain
The product is self-adhesive materials, should stick on the right place in one time, unfavorable to reuse;Forspecial use tape, please contact us
6.General painting construction method, this method is suitable for the overall waterproofing of roofs, exterior walls, etc., as well as the construction of small cracks and cracks. It can be used immediately after opening the cover, and the construction is simple
7.Repairing large cracks, expansion joints, etc. This method is suitable for waterproofing and repairing large cracks in the roof, expansion joints and the joints of buildings.
8.The cured film is smooth and free of impurities
9.Packing and delivery
11. Why choose us?
12. Welcome to contacting us.
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover