Organosilicone Defoamer for Paper Pulp

China Organosilicone Defoamer for Paper Pulp, Find details about China Defoamer, Antifoam from Organosilicone Defoamer for Paper Pulp

Basic Info.

Solid Content

16%-50%

6.5-8.5

Viscosity

200-400cps

Ionic

Weak Anionic

Trademark

Transport Package

200kgs PP Drum or 1000kgs IBC Drum

Specification

Solid content 16%-50%

Origin

China

HS Code

380992

Solid Content

16%-50%

6.5-8.5

Viscosity

200-400cps

Ionic

Weak Anionic

Trademark

Transport Package

200kgs PP Drum or 1000kgs IBC Drum

Specification

Solid content 16%-50%

Origin

China

HS Code

380992

Product Desciption

X-10C Series Organosilicone Kind Defoamer

1. Product Characteristics
(1)The main components are polysiloxane, modified polysiloxane, silica, dispersant and stabilizer etc.
(2)Have the good consistency with the application system(acrylic acid kind materials).
(3)Compound by different structure of organic silicon, defoaming quickly, with the better foam suppression performance.

2. Performance Index

ITEMS	SPECIFICATION	TEST METHOD
Appearance	White or slightly yellowish uniform emulsion liquid, no irritating odor. No sediment, no visible mechanical impurities.	GB/T 26527-2011
pH value	6.5~8.5
Solid content(%)	16±1
Viscosity (25ºC,mPa·s)	200~400
Ionic type	Weak anionic
Suitable diluent	10~30ºC thickened water
REMARK: The above data for reference only, not as a technical indicator; pH is tested by the professional pH paper(5.5-9.0), can not use the pH meter.

3. Application Field
(1)Textile industry (PVA sizing agent);
(2)Chemical building materials (cement mortar, concrete);
(3)Oil processing (drilling mud, cementing).

4. Relevant laws and regulations compliance
(1)Without NP, APEO;
(2)Without the substances mentioned in the SVHC list in the REACH Regulation.

5. Use Method
(1) X-10C can be diluted with thickening water, dilution process, the stirring speed of 30rpm-60rpm, the proposed mixing time do not more than 10min. Please refer to our customer service department for specific dilution method. We will not be responsible for any adverse consequences arising from improper use of the product.
(2) When use the product at the scene, recommended to choose defoamer easy disperse places to add , the specific application is as follows:
a.Textile acrylic acid sizing agent: as a formulation component is added after the slurry is finished (preferably at low temperature) or directly during slurry sizing. Add the amount of the total formulation of 0.2% -0.5%;
b.Chemical building materials (cement mortar, concrete): directly in the cement mortar, concrete mixing process to add; the amount of the total amount of the total formulation of 0.05% -0.5%;
c.Oil processing (drilling mud, drilling fluid additives): in the process of drilling mud to add or as a foam component added to the drilling fluid additives;
d.Petroleum processing (cementing): added during cementing mortar mixing.
Note: the best add point, additive amount, adding mode dilution ratio requires the customer according to the actual situation of the scene test decision

6. Packaging and Storage
Be packed in 25kg, 50kg or 200kg plastic drums. If there are special requirements
can be customized.

7. Standard Q/3201SKY02-2013

8. Warranty Information
The information contained herein is in accordance with the present state of our knowledge and experience, and the proposes of application and use only can be for your reference. You can contact with dealers or OUR Company, when product can not be confirmed using safety. Due to different methods of using the product and different foaming systems, the customers should check the product by preliminary trials to ensure safety and effectiveness when using OUR defoamer.
The figures on receipt are only intended as a guide and should not be used in preparing specifications. You can contact OUR Company to acquire the standard of production. OUR Company assures the product would be in accordance with the present state of product. If not, OUR Company will assume the liability of refund payment or replace the product.
ANNEX:

This test is done in the laboratory, due to laboratory conditions can not completely simulate the customer site conditions, the following test results are only for reference.
Test material: Textile size
Test method: Shake bottle method to test the suppression of foam performance, after heating and stirring to observe the compatibility.
Test medium: Acrylic acid slurry bubbling liquid.
Test conditions:
(1) Temperature is room temperature, defoamer directly added, the amount is 0.06g;
(2)150ml textile size+50ml water+5mlethyl alcohol, add 2g defoamer, keep temperature at 65~70ºC and stir for 30min, drop temperature and place for 24h to see the precipitation result.
Evaluation criteria:
The shorter of the defoaming time means the better anti-foam performance;
The less precipitation, means the better the compatibility.

TABLE1 Test of anti - foaming performance of textile

REMARK:
Blue line means the X-18, the pink line means the competitior'sproduct(Organosilicone Kind Defoamer with solid content 22%).

Organosilicone Defoamer