Products

Induction Heater for Extruder/Extrusion or Injection Machine

China Induction Heater for Extruder/Extrusion or Injection Machine, Find details about China Induction Heater, Induct Heater from Induction Heater for Extruder/Extrusion or Injection Machine

Model NO.
LK-DCGY
Maximum Sheath Temperature
800°f
Diameter
5/8" to 22"
Maximum Surface
3 W/Square Centimetre
Maximum Watt
Dependant on Application and Size
Warranty
One Year
Energy Consumption
Reduced by 50%
Trademark
dragonpower
Transport Package
Export Wooden Case
Specification
customize
Origin
China
Model NO.
LK-DCGY
Maximum Sheath Temperature
800°f
Diameter
5/8" to 22"
Maximum Surface
3 W/Square Centimetre
Maximum Watt
Dependant on Application and Size
Warranty
One Year
Energy Consumption
Reduced by 50%
Trademark
dragonpower
Transport Package
Export Wooden Case
Specification
customize
Origin
China

Where can induction heater be applied?

  • Plastic injection moulding machine
  • Hollow shaping machine/Blow-molding machine
  • Extrusion machine/Co-extrusder
  • Raw material processing equipment
  • Pelletizing equipment
  • Granular machine

Induction Heater for Extruder/Extrusion or Injection MachineInduction Heater for Extruder/Extrusion or Injection Machine

Induction Heater for Extruder/Extrusion or Injection MachineInduction Heater for Extruder/Extrusion or Injection Machine

Induction heating is the process of heating an electrically conducting object (usually a metal) by electromagnetic induction, where eddy currents are generated within the metal and resistance leads to Joule heating of the metal. The induction coil itself does not get heated. The heat generating object is the heated object itself. 

 What Advantages Does Induction Heater Have Compared With Traditional Heaters?

Advantage Comparison
                                   Induction HeaterTraditional Heater
Heating Principles         Electromagnetic InductionHeating the  Resdistance Wire   
Heated PartCharging barrel is heated directly to get higher efficiency ,but the induction coil itself is not heated to guaratte longer using lifeheater itself,then heat transfered to the charging barrel
Surface Temperature & SafetyMax. 60 Degree Centigrade,safe to touch by hands.The same with your heating temperature, Dangerous to touch
Heating RateHigh Efficiency:save 50%-70%warming -up timeLow Efficiency:No time-saving
Energy SavingSave 30-80% Power ConsumptionNo Saving
Temperature ControlHigh precisionLow Precision
Using life4-5year2-3year
Working EnvironmentNormal temperature for workers,easy and comfortableHot,especially for low latitude Area
CostCost-effective,with30-80% energy-saving rate,it takes 6-10 months to recover the cost. The higher the rate is,the less time it takes.Low

Energy-Saving Test for induction heater


Induction Heater for Extruder/Extrusion or Injection Machine
 

Table of induction heater

Model

Diameter (mm)

Voltage(V)

Power(W)

Key Technical Indexes

LK-DCGY-01

170

220

2000

1.Voltage: 220V-380V

2.Power: 2-50KW  

3.Width of induction coils: 80-2000mm

4.Current: 5A-75A

5.Diameter of induction coils:≥80mm  

6.MTBF(mean-time between failures:≥10000 hours

7.Work frequency: 10KHz-25KHz

LK -DCGY-02

230

220

2000

LK -DCGY-03

240

220

5000

LK -DCGY-04

260

380

5000

LK -DCGY-05

300

380

5000

LK -DCGY-06

350

380

50000

Note: Other models are available according to your specifications. Please refer to the Order Guide

 

Order Guide for induction heater

  1. The diameter (mm) of heaters (inner diameter for external heating or external diameter for internal heating)
  2. Width of heaters
  3. Type, length and position of leads
  4. The position and size of the hole for connecting thermocouple OR of the incision.
  5. Voltage and power density
  6. One piece OR two piece
  7. Special gap between two pieces
  8. Content of the laser stamping on the sheath of heaters if needed
  9. Order quantity
  10. Delivery date

* It's better to provide us with the drawings/pictures

Induction Heater for Extruder/Extrusion or Injection Machine
 

You Might Also Like