Can Body Maker Pail Can Making Equipment
Equipment details for pail can making production line
*** *** Specification of Tin Can Cutting Machine
1. Main Parameter :
| Model: | GT1B5 |
| Max sheet thickness: | 0.4mm |
| Max sheet width: | 1050mm |
| Min sheet width | 44mm |
| Motor power: | 1.1kw |
| Net weight: | 1400kgs |
| Dimension: | 1500x1600x1105mm |
2. Machine features :
1). Motor: Joint Venture Brand Siemens-Beide(Siemens Standard Motors Ltd.);
Electric Parts: Schneider
2). The machine is with high cutting accuracy and good efficiency.
It is easy and convenient to adjust the knives.
3). The knives adopt high-alloy steel material: Cr12MoV
And our machine is with a grinding machine for knife grinding.
3. Main parts material or brand of Tinplate Metal Sheet Gang Slitter Machine :
Material of Knife: Cr12MoV
Electric parts brand: Schneider
Motor brand: Siemens (joint venture)
*** *** Specification Of Automatic Roll Forming Machine:
The Main Parameter:
| Model | ZDJY120-320 | ZDJY120-280 |
| Production capability | 30~120Cans/min |
| Applicable can height | 70~320mm | 70~280mm |
| Applicable can diameter | 52~180mm |
| Applicable material | Tinplate steel-based |
| Applicable material thickness | 0.15~0.35mm |
| Applicable material hardness | T2.5-DR8 |
| Compress air consumption | 600L/min |
| Pressure of compress air | 0.5 MPa ~0.7MPa |
| Power | 380V , 50Hz , 1KW |
| Dimension | 700×1100×1200mm | 650×1100×1200mm |
| Weight | 350Kg | 340Kg |
*** ***Automatic Can Body Seam Welding Machine
1. Main Parameter:
Specification Of Automatic Tin Can Welder FH18-90:
| Mode | FH18-90 |
| Linear rate of welding | 6-21m/min |
| Production capability | 20-40Cans/min |
| Applicable can diameter | Φ220~Φ290mm |
| Applicable can height | 200~420mm |
| Applicable material | Tinplate steel-based |
| Applicable material thickness | 0.25~0.42mm |
| Seam welding landing | 0.8mm 1.0mm 1.2mm |
| Seam point distance | 0.5-0.8mm |
| Applicable copper wire diameter | 1.5mm 1.7mm |
| Cooling water | Temperature 12~18°C Pressure:0.4-0.5Mpa
Discharge 12L/min |
| Compressed air consumption | 400 L/min |
| Pressure of compressed air | 0.5Mpa-0.7Mpa |
| Power | 380V±5% 50HZ |
| Total power | 63KVA |
| Packed Dimension | 1200×1100×1800mm |
| Packed Weight | 1200Kg |
2. Features:
1) PLC(Programmable Logic Controller) is purchased from Japanese MITSUBISHI.
2) Low voltage apparatus are produced by SCHNEIDER.
3) IGBT(Insulated Gate Bipolar Transistor) is bought from Japanese FUJI.
4) OMRON is our sensor supplier.
5) HMI(Human Machine Interface) is purchased from WEINTEC Labs.,Inc in Taiwan.
3. Usage:
1) It is widely used for various tin can auto welder, such as food can, chemical, aerosol can and so on.
2)Can body internal and external coating machine and can body oven are optional to be added in production line
*** *** GT3B18Y Can Body Former Machine
| Model: | GT3B18Y |
| Capacity: | 15cans/min |
| Thickness: | ≤0.5mm |
| Diameter: | 220-300mm |
| Height: | 270-370mm |
| Power: | 5.5kw |
| Net Weight: | 1080kgs |
| Dimension: | 1500x900x2300mm |
Machine features:
1). It is specifically used for 16-20L Cylinder Can Flanging and Beading.
2). The hydraulic parts brand is KOMPASS
3). The electronic component: SCHNEIDER/ OMRON
4). Some of molds select the high alloy steel(Cr12MoV) and quenching(60-62HRC)
5). Motor: Siemens
*** *** Specification for GT4A19YS Can Sealing Machine
1.Main technical parameters:
| Model: | GT4A19YS |
| Capacity: | 15-20cans/min |
| Diameter: | 50-280mm |
| Maximum Height: | 300mm |
| Net weight: | 1500kgs |
| Power: | 2.2kw |
| Dimension: | 2700X950X1850mm |
2. Machine features:
1) Same Characteristic with relevant semiautomatic seamer model
2) Send can automatically and reduce labor strength;
3) Using PLC control system, make the machine run smoothly and adjust conveniently.
3. Main parts material or brand:
Material of Seaming roller: Cr12MoV
PLC control system parts brand: Delta
Pneumatic parts brand: AirTAC
Servo Motor: Made in Taiwan
*** *** Specification of Metal Handle Making Machine
| Model: | GT-BHM1 |
| Capacity: | 16-18 cans/min |
| Wire size: | 2.0-5.0mm |
| Max feeding length: | 700mm |
| Power: | 5.5kw |
| Weight: | 900kg |
| Dimension: | 2000*900*1850mm |
4. Packaging & Shipping
1) Packaging
Our products usually packed in plywood case.
2) Shipping
Our products usually use Sea transportation,Air transportation.
5. Our Services
Our products' warranty is 1 year!
If there is any quality problem with our machine during the warranty period, we will offer free parts for customer for fix the machine.
6. About US:
We are a professional manufacturer in tin can making machinery with 15 years experience in China. We provide various tin can making machines and complete customized tin can production lines,like food can ,aerosol can ,pail can ,and so on.We exported our machines to lots of countries,such as, Russia, Dubai, Saudi Arabia, Cameroon, Indonesia, Vietnam, and etc. We won high reputation by good quality, competitive prices and superior after-sale service.