Classic Control Panel for Center Pivot Fieldnet Remote Control

China Classic Control Panel for Center Pivot Fieldnet Remote Control, Find details about China Schneider Contactor 25A, Honeywell Microswitch from Classic Control Panel for Center Pivot Fieldnet Remote Control

Ground Drainage and Irrigation Machinery Type
Pumping Irrigation
Certification
ISO9001:2008, CCC, CE, UL
Condition
New
Application Field
Agriculture
Diameter
8 5/8", 6 5/8", 5"
Surface
Hot DIP Galvanization
Working Voltage
380-460V/50-60Hz
Length of Span
43.47m, 49.12m, 54.86m, 60.63m
Certificate
ISO9001:2008
Piovt Point
8 5/8"
Function
Remote Control
Advantage
Auto Reverse
Trademark
Irritech
Transport Package
40 Feet High Custom Container with Export Standard
Specification
8000 series
Origin
Anhui, China
HS Code
84248200
Ground Drainage and Irrigation Machinery Type
Pumping Irrigation
Certification
ISO9001:2008, CCC, CE, UL
Condition
New
Application Field
Agriculture
Diameter
8 5/8", 6 5/8", 5"
Surface
Hot DIP Galvanization
Working Voltage
380-460V/50-60Hz
Length of Span
43.47m, 49.12m, 54.86m, 60.63m
Certificate
ISO9001:2008
Piovt Point
8 5/8"
Function
Remote Control
Advantage
Auto Reverse
Trademark
Irritech
Transport Package
40 Feet High Custom Container with Export Standard
Specification
8000 series
Origin
Anhui, China
HS Code
84248200
As the name suggests, center pivots irrigate in a circular pattern around a central pivot point. Most center pivot machines are electrically powered, using either a generator or a public power source.
Classic Control Panel for Center Pivot Fieldnet Remote Control

Pivots use both 120 and 480 volts of alternating current (VAC) to operate. 120 VAC is used as the control circuit, powering the safety circuit, the forward and reverse movement of the pivot, and, more precisely, the movement of the Last Regular Drive Unit (LRDU). The 480 VAC is the power circuit and supplies the needed energy for the drive units to move.

The pivot's control panel operates the main functions of the machine. Depending on which control panel the pivot has, the controls will be different, but the way the pivot operates is the same. When a command is entered into the control panel, an electrical signal is sent down the pivot until it reaches the Last Regular Drive Unit. 480 VAC then travels through a motor lead cable from the tower box to the engine. The LRDU moves, either forward or reverse, as the control panel indicated.
Classic Control Panel for Center Pivot Fieldnet Remote Control
When a pivot moves, it is led by the Last Regular Drive Unit. The LRDU moves until the switch arm, connecting the last span to the second-to-last tower, is pulled to an angle that activates the next tower. Both towers then move until the next tower is activated, and this continues down the pivot until all towers have moved.
Classic Control Panel for Center Pivot Fieldnet Remote Control
Irritech offers a wide range of Control Panels. We are an industry leader in replacement parts for Center Pivot Irrigation Systems and have the expertise to help you find exactly the Control Panels you are looking for. Our selection of parts includes Center Drives, Gearboxes, Center Pivot Structural Parts, Tower Boxes, and Sprinkler Packages. DirectPivotParts is an independent parts supplier and is not affiliated with Lindsay/Zimmatic, Reinke, Pierce, Olson, or Lockwood.

Control Panels Standard Features:

. Heavy-duty, weather-tight enclosure.
. All components are UL and CSA approved.
. Eagle Percent timer.
. Hour meter.
. Volt meter.
. 24 V auxiliary tap.
. Directional switch.
. Main power disconnect.
. Stainless steel cover.
. Bolt-on mounting brackets.


Classic Control Panel for Center Pivot Fieldnet Remote Control
An end gun's operation and the Auto Reverse/Auto Stop positions can be designated. Either GPS or Encoder position sensors can be utilized, allowing adjustment by degree within the circle. The pivot's speed can be determined by entering the operator's desired water application rate. Irritech user friendly control panel shows; set speed versus actual speed, speed sensor operation, the system's current run time, and relevant GPS data such as latitude and longitude and WAAS fix.
 

Our Services

1.Timely and professional irrigation design team for clients all over the world.

2.Careful installation and debugging of our irrigation system to support Chinese domestic and dispatch engineer to foreigner countries

3.Perfect after-sale service for clients of our   irrigation system
4.Strictly control the 90% irrigation parts production using the most advanced machine

5.supply OEM prodution for USA famouse irrigation brand

Classic Control Panel for Center Pivot Fieldnet Remote Control

Company Information

Anhui IRRITECH Agriculture Equipment Corporation Limited is a high and new tech enterprise, professionally engaged in R&D, production and sales of irrigation machines and crop protection equipment used in large-scale farmland. Focusing on the labor saving, water saving, power saving and increasing yield, IRRITECH independently research and develop pivot and linear and other automatic irrigation system to offer the customers together with the professional before and after sales service.
 

IRRITECH has passed system management as ISO9001, ISO14001, OHSAS18001, IRRITECH products has certified "water saving equipment". One fully automatic production line guarantee the accuracy of cutting and welding, and guarantee the annual productivity of 162500m tubes for pivot or linear, at the same time, ERP system ensure the internal manufacturing and logistic quality.

IRRITECH was public in 2015(stock code is 835416). IRRITECH products has been successfully installed and used in most provinces in China to irrigate wheat, corn, potato, alfalfa, sugarcane, flowers, and fruits. Export to Mali in Africa, Cuba in South American, Kazakhstan and Tajikistan in Middle Asia. We are looking forward to corporate with distributors and customers to achieve win-to-win and long term benefit.

 

FAQ

1.What kinds of pivots do IRRITECH produce?

Our products can be classified into three categories: fixed center pivot, towable center pivot, and lateral move system.
The main difference between these systems is their mobility.
1.The fixed system has one stationary end of the machine, while the other moves clockwise by motorized wheels.
2.Towable pivots have three or four wheels assembled at the center of the pivot, making it towable by tractor.
3.Lateral move systems work in a linear fashion, driven by motorized wheels. Unlike center pivots, where area is determined by the length of the machine, lateral move systems depend on both system length and distance traveled.

A towable center pivot should be a maximum length of 300m for safe towing, but fixed pivots can be much longer.
Compared with both fixed and towable systems, lateral move systems depend on the source of water. Ditch fed machines recieve water from the built ditch. Hose fed machinery recieves water from underground pipelines with hydrants. For hose fed systems, the maximum length is 450m because connecting one hydrant to another incurs labor costs.

2.PIVOT DESIGN CHOICES

When purchasing a center pivot system one must select:

Mainline size and outlet spacing;
Length, including the number of towers;
Drive mechanisms;

Application rate of the pivot;

The type of water applicator.

These choices affect investment and operating costs, irrigation efficiency, and crop production. Wise decisions will result in responsible water management and conservation, flexibility for future changes, and low operating costs.

3.What is the warranty on your products?

Warranty covers our center pivot and lateral move systems up to 1 year concerning electrical equipment, and 10 years or 10,000 working hours for gearboxes and gear motors-whichever expires first.
We guaruntee 15year use concerning our galvanized eqipment against corrosion, and 3 years for our tires and rims.

4.How much does your equipment cost?

Our pricing depends on the machine you are looking for, along with several other variables. In regards to our center pivots, we have both fixed and towable pivots and lateral move systems available. We will need to know your preferred water source (ditch or hose fed), land data and the types of crops that will be irrigated. Given this information, we will also determine the necessary sprinklers for your system.

5.What are your payment terms?

We accept 30% down by T/T (wire) or 70% by L/C or T/T before shipment.

6.How long will it take to manufacture and ship a center pivot or lateral move system?

Time spent on each order depends on the quantity and specifications of your order. Some machines we have in stock, but special orders require more time. We can provide you a time estimate once we have adequate information concerning your order.
However, we can say that lateral move systems take a longer time to produce, especially if you require a ditch feed water source. Because they also require a main cart pump, diesel engine, and alternator, time also must be included for our suppliers.

7.Are these machines difficult to operate?

Our machines are very simple, and you will be able to learn their functions within an hour's time. Once you learn to operate the systems control panel, it will function automatically. We are also currently working on a remote control for our systems, which should be released soon.

8.Do center pivots and lateral move systems work on rolling or mountainous terrain?

Yes, both systems can work on rolling or mountainous land. Lateral move systems only work on up to 5% slopes, but center pivot systems will work on up to 20% slopes.

9.What is the auto stop/reverse system and when can it be used?

In certain situations, a pivot will not finish a full rotation due to obstacles in the field such as terrain, poles, houses, etc. Now the auto stop/reverse system is needed. A touch device is installed in the tower of the pivot, when hit by the rod connected, the pivot can stop/reverse automatically.

10.Can I use fertilizer device on more than one machine?

Yes, you can use our chemical injector on more than one machine such as center pivot and lateral move systems. The chemical injector is small and easily transferred by just one person. It can also promise the safety of livings, you can find the details on the introduction.

11.Can I use fertilizer device on more than one machine?

If your field is rectangular and you are not using a lateral move system, you may need end gun to spray the area uncovered. The corner control systems can control when the end gun is spraying, so that no water is wasted on covered land.

12.Is the diesel generator included in my quote?

Our diesel generator is only included with lateral move systems, otherwise we will quote with electric power. If you would like, we can include the generator in your quote for other systems.

13.If I need a CFR price, what should I do?

All we need is your destination port. Then we will provide a CFR quotation by adding the freight cost provided by our freight forwarder .