China Energy Saving IP66 Outdoor Solar Street Light with Pole, Find details about China LED Light, LED Street Lamp from Energy Saving IP66 Outdoor Solar Street Light with Pole
Pole height | 6M | 6M | 8M | 8M |
LED Lamps | 20W | 30W | 45W | 60W |
Solar Panel | 110W*1PC | 80W*2PC | 120W*2PC | 150W*2PC |
Solar Battery | 100Ah/12V*1PC | 150Ah/12V*1PC | 120Ah/12V*2PC | 150Ah/12V*2PC |
Battery Box(Optional) | Engineering Steel | Engineering Steel | Engineering Steel | Engineering Steel |
Battery Box(Optional) | Engineering Plastic | Engineering Plastic | Engineering Plastic | Engineering Plastic |
Solar Controller | 10A/12V | 15A/12V | 10A/24V | 15A/24V |
Packing:40'HQ | 150 Units | 130 Units | 100 Units | 90 Units |
Pole height | 6M | 6M | 8M | 8M |
LED Lamps | 20W | 30W | 45W | 60W |
Solar Panel | 90W*1PC | 65W*2PC | 90W*2PC | 120W*2PC |
Solar Battery | 100Ah/12V*1PC | 150Ah/12V*1PC | 120Ah/12V*2PC | 150Ah/12V*2PC |
Battery Box(Optional) | Engineering Steel | Engineering Steel | Engineering Steel | Engineering Steel |
Battery Box(Optional) | Engineering Plastic | Engineering Plastic | Engineering Plastic | Engineering Plastic |
Solar Controller | 10A/12V | 15A/12V | 10A/24V | 10A/24V |
Packing:40'HQ | 150 Units | 130 Units | 100 Units | 90 Units |
LED Street Lamp Producing Power 9W-250W High Lumen:150-150LM/W;Lifespan:50000-100000Hrs | |
* Technical Descriptions | |
* Lamp Body: High-Pressure Die-Casting Aluminum. Corrosion Resistant,IP65 or IP68 | |
* Application with Polyester Substance in its Surface. | |
* Reflector: High Purity Aluminum or Stainless Steel SS304,Mirror Polish. | |
* LED Cooler: Aluminum Material, Producing By Module | |
* Cover Glass: High Strength and High Transparent Toughened Glass | |
* Fastener Bolt and Screws: Stainless Steel, Anti-theft screw. | |
* Ambient Temp:-40~+50°C;Humidity:10%~95% | |
* Arm Diameter: 48 or 60mm | |
Solar Panel 18V/36V--Poly &Mono Silicon 5W-310W | |
* Before Production -Control Of Raw Material Before Use-Data Recording Of Raw Material---Products Tracebility | |
* During production -Control At Each Step Of Production-Validation Of Each Step By Quality Controllers | |
* After production -Systematic Flash Test On Each PV Modules-Quality Control With IEC Compliance -Tests In Our Facility Testing -Optional: Third Party Inspection Before Shipment If Needing. | |
* Limited Warranty -Workmanship for 5 years,90% of minimum power output over 12 years,80% over 20 years. -The Solar Panels Are Manufactured In According To The IEC61215 Standards.Lifespan:20-25 Years | |
Solar Battery 24AH~250AH/12V | |
* Gelled battery, Sealed Type. Deep Cycle. Maintenance Free. | |
* Real Green Power | |
* Low Internal Resistance | |
* Low Self-discharging Rate | |
* Long-life Design | |
* Wider Temperature Range | |
* Extremely good discharge recovery ability | |
Solar Charge Controller,IP68 Rating | |
* Intellectual Control Technology Based On MCU And Special Software. | |
* Adopt Tandem PWM Charge Control Method, So That The Voltage Loss Of Electrical Circuit Is Only The Half Of Diode Charge, Charge Efficiency To Improve By 3% - 6%. | |
* The Over Discharging Recovery Control And Automatically Floating Charge Control Can Prolong The Battery Service Life. | |
* Battery Reverse Connection Protection, Over-voltage Protection And Under-voltage Protection. | |
* Solar Module Reverse Connection Protection. | |
* Automatically Recovery Output, Output Over Current Protection And Out Short Circuit Protection | |
* Intelligent Time Control System, It Can Set Up 1-15 Hours Timing Or Delay Time ( Set Period To Resume Current Output, Two Period Can Be Set.) | |
* Light Control, Time Control, Temperature Control | |
* High-precision Voltage Control For The Battery Safety Work. | |
* Waterproof Design. | |
Steel Pole From 3M-12M For Street Lighting. 15M-50M For High Mast Pole | |
* Material -Q345B/A572,Minimum Yield Strength>=345n/mm2 -Q235B/A36,Minimum Yield Strength>=235n/mm2 | |
* Shape -Round, Multi-pyramidal, Column form, Polygonal Or Conical | |
* Production Process Raw Material Test→Cutting→Molding Or Bending →Welding (Longitudinal ) →Dimension Verify→Flange Welding→Hole Drilling →Calibration →Debur →Galvanization Or Powder Coating, Painting→Recalibration→Thread→Packaging |
Payment Terms | T/T(perfered) | EXW | 30% In Advance, 70% Balance Paid Before Delivery |
FOB | |||
CFR/C&F | 30% In Advance, 70% Against Copy Of B/L | ||
CIF | |||
L/C | Total Amount Above USD100,000, We Accept L/C At Sight | ||
West Union | Total Amount Less Than USD1,000 | ||
PayPal | |||
Delivery Time | 15-20 Working Days After Receiving Down Payment For One Container. |