China Auto Paint Preparation Room Is Provided for Professional Repair Work, Find details about China Clean Shop Prep Station, Automotive Prep Stations from Auto Paint Preparation Room Is Provided for Professional Repair Work
The air draft way | |||||||||
| by tunnel, which size is 4,610x2,330mm(LxW),suppoted by 40x80 galvanised square steel, | |||||||||
| Lay grilles on the tunnel, each grill size is 748x1,148x30mm, loading weight is 600KG/wheel. | |||||||||
| With fibre glass filter under the grilles, G3 Grade(EN779),type is PA-50. | |||||||||
| Cabin | |||||||||
| Inside Size | |||||||||
| 6,300x3,450x2,700mm(LxWxH). | |||||||||
| Outside Size | |||||||||
| 7,550x3,550x3,100mm(LxWxH). | |||||||||
| 4 sides configuration | |||||||||
| Rear wall: made of 1.0mm thick galvanised steel, painted with white powder. | |||||||||
| Front,Left and Right: PVC curtain, thick is 0.5mm. | |||||||||
| Roof Panel | |||||||||
| Made of 0.6mm thick bended galvanised plate. | |||||||||
| Ceiling Light | |||||||||
| Left and right upper position have 4 lighting fixtures, total 8 fixtures. Each fixture is equipped with | |||||||||
| 4 PHILLIP fluorescent tubes of 36 Watt with two in one electronic ballast. | |||||||||
| Plenum | |||||||||
| 400mm high, all spare parts of plenum are made of galvanised bended steel and treated by white | |||||||||
| powder for long using life. | |||||||||
| Ceiling Filter | |||||||||
| Supporting net is made of C shape steel with surface oil painted treatment,sub-high efficiency filter, | |||||||||
| F5 Grade(EN779),type is SP-600G. | |||||||||
| Makeup Air Units | |||||||||
| Cabinet Size | |||||||||
| 1,300x1,250x2,000mm(LxWxH). | |||||||||
| Cabinet | |||||||||
| Made of 50x50mm size galvanised square tube, three way connector made of alluminium alloy. | |||||||||
| Filtering | |||||||||
| Pre-filter,G3 Grade(EN779),type is C16-300. | |||||||||
| Motor and Fan | |||||||||
| Motor type:inside of the fan; qty.:1pc; single motor power:5.5KW, total power:5.5KW. | |||||||||
| Fan type: double intake centrifual fans, YDW-4.5S, total air capacity: 15,000m3/h. | |||||||||
| Makeup Air Control | |||||||||
| Handed Actuator to control fresh air quantity. | |||||||||
| Exhaust Air Units | |||||||||
| Cabinet Size | |||||||||
| 1,300x1,250x1,100mm(LxWxH). | |||||||||
| Cabinet | |||||||||
| Made of 50x50mm size galvanised square tube, three way connector made of alluminium alloy. | |||||||||
| Filtering | |||||||||
| Carbon Filter in "M" Shape Filter Frame. | |||||||||
| Fibre glass filter, G3 Grade(EN779),type is PA-50 . | |||||||||
| Motor and Fan | |||||||||
| Motor type:inside of the fan; qty.:1pc; single motor power:5.5KW, total power:5.5KW. | |||||||||
| Fan type: double intake centrifual fans, YDW-4.5S, total air capacity: 15,000m3/h. | |||||||||
| Makeup Air Control | |||||||||
| Handed Actuator to control fresh air quantity. | |||||||||
| Heat Exchanger | |||||||||
| 180KW, made of 1.5mm stainless steel 1Gr18Ni9Ti(SUS304), with round type multi-cycle | |||||||||
| radiatorpipe, equipped with safe anti-explosion hole, 1M stainless steel chimney, 3M | |||||||||
| long bended galvanisedsteel chimney and 1 pc of rain shield. | |||||||||
| Burner | |||||||||
| Riello G10 diesel burner, heating productivity is 100,000Kcal/H. | |||||||||
| Exhaust Air Duct | |||||||||
| Equppped with 4M straight duct, 2pcs 90° elbow duct and 1pc 30° elbow duct. | |||||||||
| Control System | |||||||||
| Temperature Controller,Hours Meter,Power Indicator,Normal Temperature Polishing Indicator, | |||||||||
| Rising Temperature Polishing Indicator,Burner Failure Indicator,Power Switch,Polishing Switch, | |||||||||
| Left Light,Right Light,Emergency Stop. | |||||||||