China Advanced Car Powder Coating Spray Paint Booth and Oven

China Advanced Car Powder Coating Spray Paint Booth and Oven, Find details about China Paint Booth, Paint Drying Chamber from China Advanced Car Powder Coating Spray Paint Booth and Oven

Basic Info.

Model NO.

BD9100A

Heating Mode

Electric

Paint Mist Treatment

Wet-type

Condition

New

Trademark

BYDE

Transport Package

Poly Foam and Iron Frame

Specification

7m long

Origin

China

HS Code

84198990

Model NO.

BD9100A

Heating Mode

Electric

Paint Mist Treatment

Wet-type

Condition

New

Trademark

BYDE

Transport Package

Poly Foam and Iron Frame

Specification

7m long

Origin

China

HS Code

84198990

Product Desciption

Hot sale Thermal Car paint baking booth with CE for Sale

Configuration:

Wallboard: Sandwich style EPS (epispastics polystyrene) 50mm thickness. Colorful steel skin boards 0.426mm thickness. Galvanized steel roof panel.

Basement: Galvanized steel sheet and square steel pipe construction. Whole grids with floor filter. Full ramps.

Door: 3 pcs of luxury front doors with 0.8mm thickness colorful steel skin. Size: 3000(w) x 2750(h). 1 pc of emergency door.Watching window with aluminum frame.

Air Circulation System: 2x4kw intake fan, 1x5.5kw exhaust fan. BELIMO 20N electric damper.

Water Based Paint Drying System: 40 units ceiling nozzles with 2 sets of centrifugal fans for drying Water Based Paint.

Burner: Italy Riello G20 diesel burner, 200000Kcal/h. The heating time 5-7min(20-60.C).

Max. temperature at 80.C. Fuel consumption is 4-5kg/vehicle.

Heat Exchanger: Made of stainless steel. The heat exchange rate reaches 85%.

Lighting System: Ceiling light 24 pcs of 15w LED lamps. Side light has 15 pcs of 16w LED lamps. 900 Lux.

Air Purification: Dual filtering structure. The primary filter can capture granules larger than 10μm. Ceiling filter capture granules bigger than 5μm. The air cleanliness in the working environment can reaches 98%.

Pollution Control System: Multi-layer fiberglass filter.

Outside size:	7100 x 5600 x 3810 mm (L x W x H)		Door size:	3020 x 2700 mm ( W x H)
Inside size:	7000 x 4000 x 2800 mm (L x W x H)		Gross power:	48(KW)
Foundation and floor (galvanized)	Foundation	Full galvanized metal foundation, full grids, The biggest features for it are beautiful, durable and better force bearing
	Surface area of floor filter	27 M² (area of grids)
	Galvanized metal basement	350mm height, the ventilation effect is better than traditional spray booth
	Drive-in ramps	3 big drive-in ramps, each size: 2000x1000mm
Wall and door (rock wool)	Wallboard and roof panel	High quality double construction fireproof insulation rock wool panel, thickness: 50mm
	3-folded entrance door with safety glass window	1set, size: 3020x2700 mm (W x H), size is bigger than traditional spray booth
	Operator's door with safety glass window	800x2000mm(W x H)
Lighting	Ceiling lighting	8units, each 4 x 36W, total 1152W
	Side lighting	10units, each 2 x 36W, total 720W
	Brightness	≥1200 LUX
Filtration system	Pre-filters	G3 grade pocket filter system, filtration effect is much better
	Ceiling filter	EU5 grade high efficient filter
	Bottom filter and exhaust filter	Fibre glass paint-stop filter, Activated carbon filter
Ventilation system	Inlet fan (direct drive motor)	1 x 7.5KW, 380V, 50HZ, CE, Turbo fan
	Outlet fan (direct drive motor)	1 x 5.5KW, 380V, 50HZ, CE, Turbo fan
	Water-based paint motor fan	2x1.5KW, 380V, 50HZ, CE, Turbo fan
	Total fan capacity	28,000m³/h
	Air flow speed in cabin	0.25m/s in empty booth, 0.26 - 0.3m/s in loaded booth
Heating system	Temperature	Set temperature 60ºС, max baking temperature is 80°C
	Heating Type	10 units infrared heaters, total 30KW
	Heating time	4-6minutes (from20 to 60ºС) under baking status
Control board	Control system	Y/Δ step-down start control system
	Function	Painting, infrared baking, lighting, emergency stop switch, failure indication, differential pressure gauge, overheat protect

Packing Standard :
Each part all has label number which is easy for installation .
Model of transportation is mainly with container transportation .
The product is modular needs one set 1.5T forklift to be loading & unloading tool .
It only needs 2 operations to finish the unloading .