High Precision universal Gap Bed Lathe Machine (CA6250B)
This series machine is suitable for turning inside and outside the cylinder, cone and other surface of revolution.Cutting all kinds of the metric system, the inch thread, the modulus and the, and and can perform drilling, etc.
Specification:
| Specifications | CA6150 | CA6250 |
| CA6150B | CA6250B |
| CA6150C | CA6250C |
| Max .Swing over bed | 500mm |
| Max .Swing over carriage | 300mm |
| Max .Swing in gap | -- | 720mm |
| Effective gap length | -- | 210mm |
| Max .Length of work piece | 750/1000/1500/2000/2200/3000mm |
| Width of bed | 400mm |
| Section of turning tool | 25×25mm |
| Spindle | Spindle speed | 10-1400rpm/16-1400rpm(24steps) |
| Hole through spindle | 52mm ,(B:80mm),[C:105mm] |
| Spindle taper | (MT6)(Φ90 1:20)[Φ113:20] |
| Feed | No.Of feed | (64 kinds)(for each) |
| Range of metric threads | (1-192mm) (44 kinds) |
| Range of inch threads | (1-24tpi) (21kinds) |
| Range of module threads | 0.25-48 (module 39 kinds) |
| Range of diametral pitc threads | 1-96DP (37 kinds) |
| Tailstock | Max.Tailstock spindle travel | 150mm |
| Tailstock spindle diameter | 75mm |
| Taper of tailstock spindle center hole | (MT5) |
| Main motor | 7.5KW(10HP) |
| Packing dimensions (L×W×H mm) | Overall dimensions for 750mm | 2440×1140×1750 |
| Overall dimensions for 1000mm | 2650×1140×1750 |
| Overall dimensions for 1500mm | 3150×1140×1750 |
| Overall dimensions for 2000mm | 3650×1140×1750 |
| Overall dimensions for 2200mm | 4030×1140×1750 |
| Overall dimensions for 3000mm | 4800×1140×1750 |
| Weight(kg) | Length | G.W.N.W. |
| Overall dimensions for 750mm | 2170 2060 |
| Overall dimensions for 1000mm | 2260 2140 |
| Overall dimensions for 1500mm | 2420 2290 |
| Overall dimensions for 2000mm | 2790 2640 |
| Overall dimensions for 2200mm | 2940 2790 |
| Overall dimensions for 3000mm | 3450 3300 |
Structure features:
1.CA series products, with "A" type as the base type, derive several deformation products.B:Spindle diameter 80 mm, type C:Spindle diameter 104 mm.F:Hydraulic copying.M type:Precise.
2.The lathe bed width in the general lathe, has high rigidity, guide surface after medium frequency quenching, durability.
3.The machine tool operation spirit concentration and skateboard has fast moving mechanism.Using single handle visualization operation, should be good human nature.
4.The machine tool structure stiffness and transmission stiffness were higher than the general lathe, high power efficiency, suitable for high speed cutting.Main shaft aperture is large, can choose accessories complete.
Machine C61 / C62 series lathe is suitable for turning inside and outside the cylinder, cone and other surface of revolution.Cutting all kinds of the metric system, the inch thread, the modulus and the, and and can perform drilling, etc.
Structure features:
CA series spring xing brand products, with "A" type as the base type, derive several deformation products.B:Spindle diameter 80 mm, type C:Spindle diameter 104 mm.
CA61..Series of ordinary lathe, CA62..Series of saddle lathe.No 105 aperture CA6140 / CA6240 series lathe.
1, the lathe bed width in general lathe, has high rigidity, guide surface after medium frequency quenching, durability.
2, machine tool operation spirit concentration and skateboard has fast moving mechanism.Using single handle visualization operation, should be good human nature.
3, machine tool structure stiffness and transmission stiffness were higher than the general lathe, high power efficiency, suitable for high speed cutting.Main shaft aperture is large, can choose accessories complete.
Standard accessories:
1.3-jaw chuck
2.4-jaw chuck
3.Steady rest
4.Follow rest
5.Foot plate
Optional accessories:
1.DRO
2.Quick change toolpost
3.Chuck protection
4.Leading screw guard
5.Toolpost protection
Contact details:
Eileen Liu
Tengzhou Uni-tech Co. Ltd.
Tel: 0632-5810216 Fax: 0632-5810216
PH:0086-15063231182