IGBT medium frequency induction heating machine
I Product Application
The CNC hardening machine is one of induction heating devices of our company. It is mainly used to process shaft components, and is also used to some special jobs. Equipped with medium frequency, high frequency or super audio power supply, it adopts liquid-spray cooling method and can satisfy general demands of factories. The machine, driven by step machine, is CNC automatic induction heating and hardening machine. It is mainly used for hardening, and also can be used for annealing and welding processes. The machine supports both manual and automatic operation, easy to learn and operate.
SPECIFICATIONS FOR 1000 DEGREE HARDENING MACHINE |
Medium frequency IGBT power supply |
Input power |
|
Three phase 380v 50HZ four wire |
Inverter frequency |
KHZ |
5-10KHz |
Rated voltage |
V |
2500 |
The workpiece/job size |
Max. Heating dimension |
mm |
300 |
Max. Length |
mm |
1500 |
Max. Weight |
kg |
200 |
The hardening machine |
Job lifting speed |
mm/s |
1~170 |
Job rotating speed |
r/min |
30~300 (variable frequency) |
The main engine size (length * width* height ) |
mm |
1600*800*3600 |
II Main Features
1) 0.001mm precision, large adjustable speed range.
2) induction switch to control max. lifting and dropping speed; The hardening machine is also equipped with failure buffer device
3) CNC control is more safe, convenient and easier to operate compared with the traditional hydraulic system.
4) Flexible. The dropping and lifting speed of top side of the workpiece/job are controlled by motor and can be adjusted according to the job length.
5) The rotating speed is adjusted on control board, digitized and straightforward. Stepless adjustment according to the job specification and craft requirement is achieved, which meets requirements of high-precision adjustment for best hardening quality.
III. Pre-Sales Service
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
After-Sales Service
* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery overseas.
IV. Package and shipping
The machine is packaged by plywood. Generally we will use sea transportation if without special requirement.
V. Company introduction
China Electric (Shanghai) Co., Limited is established since 1960s. It located in Shanghai - the most important international financial and business center of China. It has employees more than 1000. Its factory is about 30,000~50,000 square meters. It passed ISO 9001:2000 Management Certification. All its products passed CE Certificate for European Union, UL and CSA Certificate for North America, GOST Certificate for Russia and SONCAP Certificate for Nigeria.
With the belief that customer goes the first, we will offer you best product and service.