Basic Info.

Model NO.

E21

Model NO.

E21

Product Desciption

pendulum iron cutting machine,swing beam shear machine for sheets metal shearing machine





(1),Introduction of the hydraulic guillotine shearing machine:  

1,This machine adopts steel plate welding structure , have high strength and good durability.
2,The frame is entirely welded with steel plates,and treated to relive stress by tempering.
3,Hydraulic drive, return of knife beam is smooth and prompt by nitrogen cylinder.
4,The portable and prompt adjusment of the blades gap and the value of gap are indicated by digital, convenient and fast.
5, Equipped with lighting-alignment, so as to align when shearing. The stroke of knife beam can be adjusted in stepless mode.
6,Protection fence to ensure the operation safety.
7,Digital display device for size of back gauge and shearing times available. 
8,The rectangular monoblock blades featuring long life with 4 cutting edges,quality high-carbon high-chrome blades D2 quality.
9, European key electrics and Hydraulic Valves Advanced integral hydraulic system with good reliablity-Imported from Germany.

_{(2) Standard Equipment: 
 1,Estun E21s NC control System
 2,Powered Back gaugeX-axis
 3,DELTA Inverter controlled back gauge
 4,HIWIN Ball screws & Polished rod with 0,05mm accuracy. 
 5,Squaring Arm and Front Support Arms
 6,Germany Bosch-Rexroth Hydraulic
 7,Germany EMB Tubing connector
 8,Germany Siemens Main Motor
 9,Tele mecanique/Schneider Electrics
 10,Hydraulic &Electrical overload protection
11,Cutting Line Illumination and wire for shadow line cutting
12,Top blade with two cutting edges and bottom blade with four cutting edges.(6CrW2Si)
Standard NC Controller: E21S, MD11, E10S for backgauge positioning:}