High Frequency Gear Shaft Industrial Induction Hardening Machine

China High Frequency Gear Shaft Industrial Induction Hardening Machine, Find details about China Induction Hardening Machine, Induction Heating Equipment from High Frequency Gear Shaft Industrial Induction Hardening Machine

Model NO.
GYT-120AB
Work Condition
Continuously for 24hours
Work Principle
Electromagnetic Induction Heating
Application
Heating, Forging, Melting, Hardening and etc
Heat Transfer Surface
Tubular Heat Exchanger
Trademark
GY
Transport Package
Wooden Boxes
Origin
Dongguan, China
HS Code
85144000
Model NO.
GYT-120AB
Work Condition
Continuously for 24hours
Work Principle
Electromagnetic Induction Heating
Application
Heating, Forging, Melting, Hardening and etc
Heat Transfer Surface
Tubular Heat Exchanger
Trademark
GY
Transport Package
Wooden Boxes
Origin
Dongguan, China
HS Code
85144000
High Frequency Gear Shaft Industrial Induction Hardening Machine

Case hardening is a metal heat treatment process that offers a controllable and localized method of heat without contact to the metal parts or components being heated. The heat is generated by inducing an electric current to flow into a specific area of a part. This provides an economical, targeted and rapid heat treating of conductive materials.
 

Why use induction hardening?

Induction hardening is favored for parts that are subject to heavy loading. Typical applications include axles, saw blades, shafts, stampings, spindles, gears and most symmetrical parts. This method is widely used for surface hardening steel, but can be used with other materials including:

  • Carbon steels
  • Alloy steels
  • Stainless steels
  • Powder metal
  • Cast iron
  • Copper
  • Aluminum


Induction hardening is a process used for the surface hardening of steel and other alloy components. The parts to be heat treated are placed inside a water cooled copper coil and then heated above their transformation temperature by applying an alternating current to the coil. The alternating current in the coil induces an alternating magnetic field within the work piece, which if made from steel, caused the outer surface of the part to heat to a temperature above the transformation range. Parts are held at that temperature until the appropriate depth of hardening has been achieved, and then quenched in oil, or another media, depending upon the steel type and hardness desired. The core of the component remains unaffected by the treatment and its physical properties are those of the bar from which it was machined or preheat treated. The hardness of the case can be HRC 37 - 58. Carbon and alloy steels with a carbon content in the range 0.40 - 0.45% are most suitable for this process. In some cases, parts made from alloy steels such as 4320, 8620 or 9310, like steel and paper mill rolls, are first carburized to a required case depth and slow cooled, and then induction hardened. This is to realize the benefit of relatively high core mechanical properties, and surface hardness greater than HRC 60, which provides excellent protection.
While induction hardening is most commonly used for steel parts, other alloys such as copper alloys, which are solution treated and tempered, may be induction hardened as well. Applications include hardening bearing races, gears, pinion shafts, crane (and other) wheels and treads, and threaded pipe used for oil patch drilling.



Induction Heating Equipment Parameter:
ModelGYT-120AB (Three phase)
work power340V-430V
Maximum input current  180A
Output power  120KW
fluctuating frequency10-50khz
output current400-4000A
the flow rate of cooling water0.08-0.16Mpa 10L/Min
water temperature protection point50C
product sizemain : 650x550x1620mm
transformer : 870x430x750 mm
net weightmain : 150gks
transformer : 120kgs
 
ModelGY-PLC1000
Maximum clamping parts length1000mm
Maximum quenching diamention100mm
Maximum workpiece weight200kg
Workpiece travel speed1-30mm/s
Workpiece updown speed120mm/s
Rotating speed1-200r/min
Cooling wayimmersion ,spray,
Machine size after packing2440*1320*900MM
Operationautomatically or manually

 
Delivery Time: within 7 workdays.
Shipping Term:By sea,By air,by express.

Extra accessories accept choose,  
1>Chiller
2>Customer design Coil 
3>Infrared Thermometer
4>Back-up Electronic Boards
5>Forging Furnace,Melting Furnace,Hardening Fixture
 
 
High Frequency Gear Shaft Industrial Induction Hardening Machine
High Frequency Gear Shaft Industrial Induction Hardening Machine
 
High Frequency Gear Shaft Industrial Induction Hardening Machine
 
 
High Frequency Gear Shaft Industrial Induction Hardening Machine
 
High Frequency Gear Shaft Industrial Induction Hardening Machine
 

Pre-sale service:
1. Immediate reply to your inquiry.
2. Experienced sales answer all questions in fluent English.
3. Customized design is available.
4. Detailed information of our products, and our company if needed.
After-sale service:
1. Technical support, or alternative accessories if necessary.
2. Freely guide installation, commissioning and test run.
3. One year's warranty. Once there is a trouble within one year, professional engineers and sales will be promptly appointed to help.





High Frequency Gear Shaft Industrial Induction Hardening Machine