Products

Ring Hot Metallic Gasket Maker Rx Ring Joint Gasket

China Ring Hot Metallic Gasket Maker Rx Ring Joint Gasket, Find details about China Ring Joint Gasket, Rtj from Ring Hot Metallic Gasket Maker Rx Ring Joint Gasket

Model NO.
RS2
Shape (for Gasket)
Ring Gasket
Size
1/2"--36"
OEM&ODM
Yes
Service
24h
Supplier
15 Years of Manufacturing Experience
Certificate
ISO, TUV, SGS
Trademark
Rilson
Transport Package
Wooden Cases
Specification
Standard, As per customers′ request
Origin
China
HS Code
84841000
Model NO.
RS2
Shape (for Gasket)
Ring Gasket
Size
1/2"--36"
OEM&ODM
Yes
Service
24h
Supplier
15 Years of Manufacturing Experience
Certificate
ISO, TUV, SGS
Trademark
Rilson
Transport Package
Wooden Cases
Specification
Standard, As per customers′ request
Origin
China
HS Code
84841000
 
Octagonal,Oval,BX type,RX type,IX type and Lens Ring Joint Gaskets
  Rilson manufactures and supplies a large variety of ring joint gaskets. The RTJ standard size gaskets are manufactured in
 
accordance to API-6A and ASME B16.20 specifications. Rilson is licensed by the American Petroleum Institute (API).
Products Description
 
Octagonal Ring Joint Gaskets (Style No: RS2-Ra) and Oval Ring Joint Gaskets(Style No: RS2-Rb)
Ring joint gaskets come in two basic types, an oval cross section and an octagonal cross section. These basic shapes are used in pressures up to 10,000 psi (64 MPa). The dimensions are standard- ized and require specially grooved flanges. The octagonal cross section has a higher sealing efficiency than the oval and would be the preferred gasket. However, only the oval cross section can be used in the old type round bottom groove. The newer flat bottom groove design will accept either the oval or the octagonal cross section. The sealing surfaces on the ring joint grooves must be smoothly finished to 63 micro inches and be free of objectionable ridges, tool or chatter marks. RTJ assemblies seal by an initial line contact or an edging action as the compressive forces are applied. The hardness of the ring should always be less than the hardness of the flanges to prevent flange deformation.Dimensions for standard ring joint gaskets and grooves are covered in ASME B16.20 and API 6A, API 17D and ASME B16.5/B16.20.
Ring Hot Metallic Gasket Maker Rx Ring Joint GasketRing Hot Metallic Gasket Maker Rx Ring Joint Gasket
RX Ring Joint Gaskets(Style No: RS2-RX)
RX Ring Designations for API 6B Flanges
RX ring gaskets are similar in shape to the standard octagonal ring joint gasket but their cross section is designed to take
advantage of the contained fluid pressure in effecting a seal. They are made to API 6A and interchangeable with standard octagonal rings for oil field drilling and production applications in API 6B flanges. RX is used at pressures up to 15,000 psi (103 MPa).Standard sizes are stocked in low carbon steel, 304 and 316.Ring Hot Metallic Gasket Maker Rx Ring Joint GasketRing Hot Metallic Gasket Maker Rx Ring Joint Gasket
BX Ring Joint Gaskets (Style No: RS2-BX)
BX Ring Designations for API 6BX Flanges
The BX ring gasket differs from the standard oval or octagonal shape since it is square in cross section and tapers in each corner. All BX ring type joints incorporate a pressure passage hole to allow for pressure equalization each side of the sealing faces. On assembly, metal to metal contact of the flange faces is achieved. They can only be used in API 6BX flanges. BX is used at pressures up to 15,000 psi. Standard sizes are stocked in low carbon steel, 304 and 316.Ring Hot Metallic Gasket Maker Rx Ring Joint GasketRing Hot Metallic Gasket Maker Rx Ring Joint Gasket
IX Ring Joint Gaskets (Style No: RS2-IX)
The metal ring joint gasket is made of metal material by forging and heat treatment and machining . IX Seal Rings are designed and used where NORSOK CFC(Compact Flange Connections) are in use. The rings come in three different kinds of steel and are coated with PTFE in varying colors in order to distinguish between them (Standard identification NORSOK) The designed or materials shall be selected, so that main sealing ares can not be subject to corrosion.
Typical minimum yield stress and ultimate stress of the seal ring material shall at maximum design temperature be 300MPa and 360MPa, respectively, in order to allow for reasonably elastic spring-back. Lower strength may be used, but is not recommended. The user is responsible for selecting a seal ring material which is suitable for the service medium and the design temperature conditions. Seal ring materials are commonly chosen to be compatible with the flange material, I.e. Duplex seal ring in duplex flange.
Ring Hot Metallic Gasket Maker Rx Ring Joint GasketRing Hot Metallic Gasket Maker Rx Ring Joint GasketRing Hot Metallic Gasket Maker Rx Ring Joint GasketRing Hot Metallic Gasket Maker Rx Ring Joint GasketRing Hot Metallic Gasket Maker Rx Ring Joint GasketRing Hot Metallic Gasket Maker Rx Ring Joint Gasket
RFQ
1.how long can i get the feedbacks after we sent the inquiry? 
we will reply you within 12 hours in working day.
2.are you a direct manufacturer or trading company?
we have our own factory,we also have our own international sales department. we produce and sell all by ourselves.
3.what products can you offer?
We mainly produce: spiral wound gaskets, Ring Joint gaskets, metal/non-metal gaskets.
4.what applications do your products relate to?
Our products cover almost the entire applicable fields of metal gaskets, mainly in petrochemical, machinery, electric power, metallurgy, shipbuilding, medicine, atomic and other industries.
5.can you do customized products?
yes,we are mainly doing customized products according to the customers' drawings or samples.
6.do you have some standard parts?
Yes, in addition to customized products, we also have some standard parts that are mainly used on petroleum pipelines, which are mainly used for pipes, valves, pumps, heat exchangers, condensing towers, flange holes and other connections,etc.
7.how about the capacity of your company?
Our Company was founded in 2007 and registered capital is RMB5 million yuan,the manufacturing base covers a land area of 10000 square meters with dozens of sealing production lines mainly inclusive of production, R&D ,Inspection and so on.With around 150 employees,continuously introduced in German Laser Cutting Machine,Taiwan CNC Lathes ,American Semi-automac winding machine while build production line for semi-automatic spiral wound machine in house,the company achieves an annual output of more than 6 million pieces for Ring Joint Gasket Metallic and Non-Metallic Gasket .
8.how many employees of your comany?what about the technicists?
we now have more than 1500 employees, including 10 engineers and 20 technicians.
9.how to guarantee the quality of your goods?
we will do the inspection after every process.for the finished products,we will do 100% inspection according to the customers' requirements and the international standard.
10.what's the payment term?
when we quote for you,we will confirm with you the way of transaction,fob,cif,cnf,etc.
for mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.the most common way is by t/t. l/c is also acceptable.
11.how to deliver the goods to us?
Usually we ship by sea, because we are in Hangzhou Bay, and we are very close to Ningbo Port and Shanghai Port, so it is very convenient to export by sea. Of course, if the customer's cargo is urgent, we can also transport it by air. Ningbo Airport and Shanghai International Airport are also very close to us.
12.where are your products mainly exported to?
our products are mainly exported to over 30 countries such as usa,germany,japan,spain,italy,uk,korea,australia,canada and etc.our clients include many oem customers who specialize in train,automobile,forklift and construction machinery,we already have had cooperation with more than 10 of the world's top 500 companies as one of their major casting suppliers in china.

You Might Also Like