Usun Model :AB02  2:1 ratio 8-16 Bar  100mm driven cost effective  compressed air

pressure booster pump for sale  

General Information for Air driven air pressure amplifier  

 Our USUN Air Amplifiers are pneumatically driven reciprocating piston/plunger pumps

and are ratio devices  that utilise low pressure compressed air driving a larger diameter

 piston (area x pressure), which is linearly connected to a smaller air piston.

 1.  AIR DRIVE SECTION

The air drive section consists of a light weight piston complete with seals running inside an

aluminum barrel. The diameter of the air piston is 100mm. When compressed air is supplied to

the pump the air pushes the air piston down on a compression stroke

 Under the control of pilot pins (poppet valve) triggered at each end of the stroke

Key features

1 )  stainless steel wetted materials of construction

2)  Specialised construction materials available

3) PTFE pressure seals as standard

4) Separation between gas & pneumatic seals

5) No airline lubrication required

6) 120mm stroke reduces cycle rate & increases life

7) Suitable for most hazardous areas

8) Available as a complete packaged system 

Main technical data  




Typical technical data for air driven air pressure amplifier 

 

Remark 1) Maxium outlet pressure are at an air driven pressure of 8 bar or 116 PSI ,for long life using

of such pump ,we suggest that air driven pressure should be not more than 8 Bar  .


Typical application of such air driven air pressure amplifier  

AIR AMPLIFIER PRODUCT COMPARISON TABLE

To select the right amplifier for your application you will need to 

know the  following parameters:

The available air pressure & volume

The desired pressure and flow rate

If you are unsure of these parameters but know a competitor brand's model number,

 use the air amplifier product comparison table below to help you choose the

 right USUNp air amplifier.