Products

2.5MPa 220 º C Epoxy FRP Pipe for Slurry
2.5MPa 220 º C Epoxy FRP Pipe for Slurry

2.5MPa 220 º C Epoxy FRP Pipe for Slurry

China 2.5MPa 220 º C Epoxy FRP Pipe for Slurry, Find details about China FRP Pipe, FRP Pipes from 2.5MPa 220 º C Epoxy FRP Pipe for Slurry

Model NO.
DN25-DN4000
Inner Liner
Epoxy Vinyl Ester Resin
Temperature
220 Degree
Trademark
HYX
Transport Package
Steel Frame
Specification
DN25-4000MM
Origin
China
HS Code
39172900
Model NO.
DN25-DN4000
Inner Liner
Epoxy Vinyl Ester Resin
Temperature
220 Degree
Trademark
HYX
Transport Package
Steel Frame
Specification
DN25-4000MM
Origin
China
HS Code
39172900
FRP Pipe, FRP Spraying Pipe, Air Oxide Pipe, Slurry Pipe for FGD system
 
Technical characteristics
  1. Corrosion resistant: the inner liner of the pipe adopts epoxy vinyl ester resin, it can resist the erosion from the fume and liquid with sulfur, fluorin.
  2. Heat resistant: the inner liner adopts the epoxy vinyl ester resin which HDT is 104ºC and 154ºC,it can resist the temperature of 220ºC instantly.
  3. Good abrasion: the abrasion resistant filler has been added during the fabrication of the pipe, the roughness coefficient of inner surface layer and outer surface layer is low, it has good abrasion resistant for the liquid with 15% solid.
  4. Heat shock resistant: the pipe fabricated with epoxy vinyl ester resin, it has good heat shock resistant, and it can avoid the delamination occurs under the condition of heat shock at 200ºC
  5. Winding formation: adopt computer control filament reciprocation type continuous winding process, it can perform reasonable proportioning according to the axial and hoop stress be undertook under it's working condition. It can improve the adhesive property between layers, and the hoop crack occurs also be avoided.
  6. Easy formation: every kind of nonstandard part can be made according to the requirements of the installation.
 
Specification: DN25-DN4000mm
 
Temperature can be undertook:220ºC
 
Pressure can be undertook: 2.5MPa
 
Thickness of abrasion resistant layer:>2.5mm
 
Color: green, light yellow
 
Connection way
The spraying pipe adopts filament wrap connection or flange connection, slurry pipe, air oxide pipe, etc adopt plain end butt connection.
Application of FRP pipe in FGD system
FRP has light weight, high strength, corrosion resistant, heat resistant, shock resistant, low cost, etc outstanding characteristics, currently, FRP pipe has been used for GFD system in large amount, such as: FRP spraying pipe, air oxide pipe, slurry pipe, air oxide spraying gun, filter screen, etc.
 

You Might Also Like