25HP, rotary screw compressor
Type: SC-18A
Specification:
-Model: SC18A, oil injected screw compressor
-Free air delivery: 32.9 m3/min 90 cfm
-Rated operating pressure: 10 bar
-Main motor: 25HP/18KW, TEFC/IP54/1.15 S. F/2950 RPM
-Power supply: 380-400V/50Hz/3pH
-Rotor speed: 4000 RPM
-Control type: Microprocessor
-Driven type: Belt
-Cooling type: Air cooling
-Residual oil content: Less than 3 ppm
-Oil volume: 10 liters
-Delivery air temp: Less than 8 above ambient temp
-Operating condition: Less than 45 of ambient temp
-Noise level: Less than 70 dB(A)
-Dimension: 1080mm*845mm*1350mm
-Weight: 630 kg
-Exhaust hole: 1 1/4 inch

Performance Features:
-high volumetric efficiency screw air end built by Germany and Italy, with new profile 5/6 lobe relation
-Air inlet filter and intake valve, automatic capacity control: Load/unload
-TEFC premium efficiency electric motor with UL, CE approval
-Microprocessor controller functions:
Display information on control panel: Exhaust pressure and temperature, running time, current of motor, state of load/unload, using time and replacing time for lubricant, air filter, oil filter and oil separator.
Fault information inquiry;
Power indicate light, phase protection light.
-Safety Devices for protection:
Automatic shutdown of high temperature, high pressure, low oil,
Phase protection, wrong rotation of motor shutdown warning.
Motor overload shutdown warning.
Emergency shut down button.
-low voltage starting, star/delta type
-Integrated oil separation system, with minimum pressure valve, thermostatic valve, safety valve
-Big air/oil after cooler can be used in high temperature environment
-Convenient belt tension adjustment system
-Full sound enclosure with dual filtration
-Synthesized lubricant, long life 4000 hours.