Brief introduction

DIN rail industrial PLC Ethernet bridge is a powerline telecommunication product which being developed by WonderTek Technology (KunShan) Co.,LTD., itsupports the G.hn protocol and the actual bandwidth up to 400Mbps. The product has been widely used in many aspects just as railway, mines, industrialtelecommunication
and metro etc...

1.1 Highlight

1.1.1 Technical parameters

Support G.hn.
Industrial DIN rail style installation
Actual bandwidth up to 400Mbps
The maximum transfer distance up to 1000 meters
Self-adapt the rate
Compatible with all G.hn devices
One Domain Master can manage 15pcs End Point.
There can be 16 groups(16 different Domain Master) of PLC
telecommunication devices in the same power line circuit

1.1.2Manageability

Support Remote Firmware update(TR069)
802.3D Ethernet Bridge.
802.1Q VLAN.
Quality of Service(QoS) .
IGMO(IPv4)Snooping &MLD(IPv6)Snooping
Support local web management

1.1.3Operating environment

Working temperature: -40ºC-80ºC.
Operating humidity: 10%-85% no condense
Storage humidity:5%-90% no condense

1.1.4Design standards

ITU-T G.9960
IEC 60529
IEC 50022
IEC 60068-2-6
MIL-STD-810G

1.2Features

Packet loss:≤0.1%(100M,load70%)
Support 7*24 hours all weather operation
hardware watch dog function
PING≤2MS
The quantity of the group ≤16pcs

1.3Immunity of ESD

The testing voltage which the device should be beared: ±6kV direct Discharge,
±8kV
air discharge. Discharge number in Each sensitive testing point:Plus-n-Minus 10
times each, Every time the discharge interval is 1 s, according to B/T
17626.2-2006.

1.4Immunity of electrical fast transient impulse group(Common mode)

The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008

Specification

1.5Anti interference of surge impact

The testing voltage which the device should be beared: ±2kV, the interval of
continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of
discharge tube type)

1.6Anti- vibration

Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum
amplitude
7mm), interface with no loose, device with no Sealing off and drop in the test.

1.7System topology

COAX75ohm
100meter about 500Mbps
200meter about 400Mbps
300meter about 300Mbps
400meter about 150Mbps
500meter about 90Mbps
600meter about 50Mbps
800meter about 40Mbps