Products

Weight Indicator for Load Cell

China Weight Indicator for Load Cell, Find details about China Weight Indicator, Indicator from Weight Indicator for Load Cell

Model NO.
AS-2
Application
Commercial
Certification
CE
Customized
Customized
Model
A12
Aplication
Floor Scale
Input Signal Range
-10mv~15mv
Load Cell Connection
4 at 350 Ohm
Trademark
QYE
Transport Package
Inner Side Plastic Bags, Outside Carton Box
Specification
CE
Origin
Shaanxi, China
HS Code
8423900000
Model NO.
AS-2
Application
Commercial
Certification
CE
Customized
Customized
Model
A12
Aplication
Floor Scale
Input Signal Range
-10mv~15mv
Load Cell Connection
4 at 350 Ohm
Trademark
QYE
Transport Package
Inner Side Plastic Bags, Outside Carton Box
Specification
CE
Origin
Shaanxi, China
HS Code
8423900000
Weight Indicator for Load Cell

Feature 

1. Using full-blown lines and reliable device for amplifying and transmitting of the resistance strain
type weighing transducer,
outputting the signal: 0~10V ,(0~5V) or 4~20mA, connecting with PC or PLC to consist measuring control system;
2. Input signal: 0~2mv/v;
3. Output signal: 105 outputting 0~10V (0~5V), 106 outputting 4~20mA;
4.Supply power: DC24V(min18v,max36v);
5.Dimensions(mm):100×68×55;
6. Linearity: 0.02%FS.

Technique Datas:

Linearity

0.02%FS

input signal range

6~30mA

Zero range

0~60%

Adjustable full-scale range

6~30mV

Sensor excitation power

9 ~ 12V adjustable output voltage, current limiting with short circuit protection ≤200mA

Zero hysteresis range

Voltage signal: 0 ~ 5V

Current signal: 0 ~ 20mA (load resistance ≤500Ω)

Excitation power supply

temperature stability

25ppm/ºC

Sensor excitation power

9 ~ 12V adjustable output voltage, current ≤200mA, with short circuit current limit protection

Power supply

AC220±22V,50HZA or DC24±1V or DC12±1V

Power consumption About

5VA

Working temperature

-10~50ºC

temperature

≤80%RH

Wiring Box

160 × 152 × 67mm (height × width × thickness)

(Not including connectors)

92(L)×63(W)×32(H)mm,48(L)×33(W)×17(H)mm

Electrical connection

1. QA-105/106 are all using inputting/outputting joints, connecting separately the input signal of transducer and the output signal of module.

2. The request for signal cable: transmitter use plastic waterproof joint,;

The request for Cable diameter:6±0.3(mm).

3. The connection type of the transducer signal inputting terminals corresponding to connecting line terminals:

V+: Excitation +;
GND: Excitation -;
IN+: output signal +;
IN-: output signal -.

4. The connection type of the module signal inputting terminals

corresponding to connecting line terminals:
OUT: the terminal of transmitter signal outputting;
DC: 24V amplifying/Excitation+;
GND: amplifying / Excitation-ground.
Weight Indicator for Load Cell
The adjusting and the ordering instrument of the product: 

1.The correct connecting the transducer with the supply power, after 10 minutes powering on, when the transducer is out off load ,to adjust the potentiometer which shows "Z" making the outputting for 0Vor 4mA; Adding to the standard load, adjusting the potentiometer which shows "S" making the outputting for 10V(5V) or 20mA.
2. The transducer power supply of 105 and 106 amplification transmitter:
Standard: 15V, Delicate: 10V.
3. Please explain the sensitivity and the output resistance of the transducer, when ordering.
 

You Might Also Like