PTFE Sintering Furnace/F4 Sinter Machine for Aerospace,Telecommunications etc






Application of Sintering furnace: 
1. This machine is suitable for aerospace, electrical appliance,telecommunications equipment and instrumentation circuit.
2.Applicable temperature:-60ºC~+250ºC;
3.Conductor material:use of silver plated wire, tinned-plated copper wire or bare copper wire;
4.AFR250 or similar to AFR250 after taping, sintered.

Basic supporting composition of Sintering furnace: 
Single head dynamic pay-off rack→ dancing wheel→ single head sinter → constant temperature trough→ single head hauling machine
This production line depends on manufacture situation to upgrade the configuration. Optical choose diameter measuring device, spark testing. 

Main technical parameter of Sintering furnace: 
Application for sintering polyimide multiple wrapping insulate aviation conductor. 
Applicable wire diameter is Φ0.25-Φ6.0mm. 
Wire production speed is 1.5-60m/min. 
Paying-off motor: 0.75kw converter. 
Hauling machine motor: 0.75kw converter. 
Temperature measuring point (total in 8 point): 7 points on the main frame, 1 point on the water seal tank. (depending on the height of sinter)
Operating direction: From left to right on the right hand. 
Temperature control: Japan RKC temperature-controlled meter. 
Taking-up and paying-off reel: OD≤Φ500mm, OW≤300mm, inner bore Φ24-Φ56mm. 
Taking-up type: Magnetic powder display tension. 


Our Services:
1) Machine installation.
2) Machine commissioning.
3) Training customer's engineer.
4) Provide technical support all the time.