China 36V10A 350W AC DC Power Inverter with Ce IEC FCC RoHS Approved, Find details about China Switching Power Supply, LED Driver from 36V10A 350W AC DC Power Inverter with Ce IEC FCC RoHS Approved
Model | S-350-5 | S-350-12 | S-350-15 | S-350-24 | S-350-36 | S-350-48 | |
output | DC voltage | 5V | 12V | 15V | 24V | 36V | 48V |
Voltage tolerance | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | |
Rated current | 50A | 29A | 23.2A | 14.6A | 10A | 8.3A | |
Current range | 0~50A | 0~29A | 0~23.2A | 0~14.6A | 0~10A | 0~8.3A | |
Rated power | 250W | 348W | 348W | 350.4W | 360W | 398.4W | |
Ripple&noise | 100mvp-p | 150mvp-p | 150mvp-p | 150mvp-p | 150mvp-p | 200mvp-p | |
DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | ±10% | ±10% | ±10% | |
input | Voltage range | 90~132VAC/180~264VAC(selected by switch),255~373VDC | |||||
frequency | 47~63HZ | ||||||
AC current | 6.5A/115VAC,4.0A/230VAC | ||||||
efficiency | 78% | 80% | 80% | 82% | 82% | 83% | |
Inrush current | Cold start current25A/115VAC,50A/230VAC | ||||||
Leakage current | < 3.5mA/240VAC | ||||||
protection | overload | Rated output power105%~135% start over load protection | |||||
protection type :rated current limit,auto-recovery after fault condition is removed | |||||||
Over voltage | 6.8~8.2V | 15.6~17.8V | 18.6~20.8V | 30.6~33.2V | 33.2~35.6V | 54.8~56.6V | |
Protection type:hiccup mode,auto-recovery after fault condition is removed | |||||||
Over temperature | ≥55ºCfan on,≤50ºCfan off,≥85ºCstart over temperature protection | ||||||
Protection mode:cutoff output,auto-recovery after temperature become normal | |||||||
environment | Working temp,humidity | -10ºC~+60ºC,20%~90%RH | |||||
Storagetemp,humidity | -20ºC~+85ºC,10%~95%RH non-condensing | ||||||
Withstand vibration | 10~500HZ,2G10min/1cycle,period for 60 minutes,each axes | ||||||
safety | Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||
Isolation resistance | I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC | ||||||
Fitstandard | Safety standard | Compliance to UL1012 | |||||
EMC standard | Compliance to EN55022,CLASSA | ||||||
others | Dimension | 215*115*50mm(L*W*H) | |||||
Weight/packing | 1.0kg/24pcs/25kg/0.049 m³/1.72CUFT | ||||||
note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25ºCof ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation |