10g SFP+ DWDM 10km-80km 1550nm Transceiver Module 10g DWDM SFP+ Optical Transceiver

China 10g SFP+ DWDM 10km-80km 1550nm Transceiver Module 10g DWDM SFP+ Optical Transceiver, Find details about China SFP Module, Fiber Transceiver from 10g SFP+ DWDM 10km-80km 1550nm Transceiver Module 10g DWDM SFP+ Optical Transceiver

Model NO.
SFP-10G-IR-2
Trademark
wseelaser
Specification
57.5*14.3*12.7mm
Origin
Shandong
HS Code
8517622990
Model NO.
SFP-10G-IR-2
Trademark
wseelaser
Specification
57.5*14.3*12.7mm
Origin
Shandong
HS Code
8517622990
10g SFP+ DWDM 10km-80km 1550nm Transceiver Module 10g DWDM SFP+ Optical Transceiver10g SFP+ DWDM 10km-80km 1550nm Transceiver Module 10g DWDM SFP+ Optical TransceiverSFP+ transceivers, according to Enhanced 8.5 and 10 Gigabit Small Form Factor Pluggable "SFP+" Multi-Sourcing Agreement (MSA) SFF-8431 and SFF-8472, revision 10.4, are designed for 10G Ethernet serial optical data communication up to 2km on multimode fiber.
Features 
  1. Supports up to 11.3Gb/s bit rates
  2. Duplex LC connector
  3. Hot pluggable SFP+ footprint
  4. 1310nm FP transmitter, PIN photo-detector
  5. Applicable for 2km SMF connection
  6. Low power consumption, < 1W
  7. Digital Diagnostic Monitor Interface
  8. Electrical interface compliant to SFF-8431
  9. Operating case temperature:
Commerical:0 to 70 °C
Industrial:-40 to 85 °C



10g SFP+ DWDM 10km-80km 1550nm Transceiver Module 10g DWDM SFP+ Optical Transceiver10g SFP+ DWDM 10km-80km 1550nm Transceiver Module 10g DWDM SFP+ Optical Transceiver
Transmitter Operating Characteristic-Optical, Electrical
ParameterSymbolMin.TypicalMax.UnitNote
Centre WavelengthλC126013101355nm 
Spectral WidthPm--1nm 
Laser Off PowerPoff---30dBmNote1
Average Optical PowerPavg-6--1dBmNote1
Extinction RatioER34.5-dBNote2
Transmitter Dispersion PenaltyTDP--3.2dB 
Relative Intensity NoiseRIN12OMA---128dB/Hz 
Optical Return Loss ToleranceORLT--12dB 
Side Mode Suppression Ratio  SMSR30--dB 
Operating Data RateGb/s2.4576-10.7Gbps 
Optical Eye Mask%5--%Note2
Tx Input Diff. VoltageVI180-700mV 
Tx FaultVoL0-0.8V 
VoH2.0 Vcc+0.3  
Eye Diagram  IEEE Std 802.3-2005 10Gb Ethernet 10GBASE-LR compatible
Notes:
[1] Average power figures are informative only, per IEEE 802.3ae.
[2] Measured with a PRBS 231 -1 test pattern @10.3125Gbps
Receiver Operating Characteristic-Optical, Electrical
ParameterSymbolMin.Typ.Max.UnitNote
Center Wavelengthλr1260-1355nm 
Receive Sensitivity In Average PowerPsen---14.4  dBmNote1
Stressed Receiver Sensitivity In OMA ---10.3dBmNote2
Los AssertLosA-30--dBm 
Los DessertLosD---16dBm 
Los HysteresisLosH0.5--dB 
Receiver Overload (P avg )  P OL0.5--dBmNote1
Notes:
[1] Measured with PRBS 231 -1 test pattern, 10.3125Gb/s, BER<10-12 
[2] Comply with IEEE 802.3-2005.
[3] The wavelength 1411/1431/1451nm need to use dispersion compensating fiber(DCF) can up to 10km, Else,
1411/1431/1451nm can up to 15km;
10g SFP+ DWDM 10km-80km 1550nm Transceiver Module 10g DWDM SFP+ Optical Transceiver10g SFP+ DWDM 10km-80km 1550nm Transceiver Module 10g DWDM SFP+ Optical Transceiver