Stainless Steel Wedge Wire
Xinlu V-Wire design continuous slot wedge wire screen gives you maximum open area and minimum plugging.
TYPE 304 STAINLESS STEEL WEDGE WIRE SCREEN:
The v-wire or wedge wire tapered opening becomes progressively wider toward the interior of the well screen. This produces a non plugging opening ( unlike mesh construction ) that has only two contact points to retain sand particles, thus increasing efficiency and lowering entrance velocity.
Our stainless steel wedge wire well screens are manufactured using unique computer controlled machinery in which a continuous length of profile wire of a triangular section is fusion welded into support rods. This 'V' shaped profile wire is wound around the support rods over the full length of the screen thus creating a continuous slot opening.
Atlas well screen offers many advantages:
A continuous slot opening which significantly increases the available open area, thus providing a greater access to the water bearing zone.
A 'V' shaped profile wire which avoids clogging and ensures uninterrupted flow.
A uniform and efficient well development due to the continuous slot opening.
Slot (mm)
Standards; 0.25-0.50-0.75-1.00-1.50-2.00-3.00
Customized Slots are considered.
Specification (wedge wire): | Width(mm): 1.50 1.80 2.30 3.00 3.30 3.70 Height(mm): 2.20 2.50 2.70 3.60 4.30 4.70 5.60 6.30 7.00 |
Specification (support rod): | Width(mm): 2.30 3.00 3.30 3.70 Height(mm): 2.70 3.60 4.70 5.60 6.30 Round: From 2.50mm to 6.0mm |
Note: other specifications available as per request |
Slot size: | 0.10, 0.15, 0.20, 0.25, 0.30^^ 6.00mm also achieved upon request. |
Material: | galvanized low carton (LCG), stainless steel (304,316 etc.) |
Length: | up to 6 meters |
Diameter: | from 25mm to 1200mm. |