China Stable Quality Large Angle Sidewall Transport Conveyor Belt Conveyor, Find details about China Conveyor, Belt Conveyor from Stable Quality Large Angle Sidewall Transport Conveyor Belt Conveyor
Technological design and technical performance
According to the running characteristics, ribs and corrugated sidewall conveyor belt must be increasing its flexible ability and elongation. Ribs with high bear skeleton intermediate layer, adopts a plastic cord nylon 1260/D2 horizontal labels in the middle of waveform ribs, which greatly improves the tear-resistant, torsion-resistant, and vertical stiffness, and extended the life span of the ribs.
Convey belt combined rib and variety of physical properties indicators
Combination of base band. ribs. Diaphragm of hypothermia rapid curing method thorough solves the quality failures during the use of the corrugated sidewall conveyor belt, sulfide it into rugged one. With the overall physical properties of rubber, after detection, curing portfolio ribs. Partitioning and base band 22.3mpa between the tensile strength, tensile elongation of 420%. after the two combinations sulfide base band mechanical performance.
Various kinds of specification parameter of the clapboard
Specification of the clapboard | Height of the clapboard | Amplitude | Pitch of waves | Width of the motherboard | Square number per meter | Related clapboard | Model of the clapboard | Width of the Clapboard | Square number per meter |
| S | 40 | 42 | 41 | 60 | 0.45 | 30 | T | 30 | 0.45 |
| S | 60 | 42 | 41 | 60 | 0.85 | 50 | CT | 55 | 0.85 |
| S | 80 | 42 | 41 | 60 | 1.03 | 75 | CT | 75 | 1.03 |
| S | 100 | 42 | 41 | 60 | 1.34 | 90 | CT/T | 100 | 1.36 |
| S | 120 | 42 | 41 | 60 | 1.69 | 110 | CT/T | 100 | 1.70 |
| S | 160 | 60 | 60/63 | 80 | 2.44 | T150/140 | CT | 140 | 3.2 |
| S | 200 | 60 | 60/63 | 80 | 3.38 | 180 | CT | 160 | 3.5 |
| S | 240 | 70 | 55 | 80 | 4.75 | 220 | CT | 170 | 5.2 |
| S | 300 | 80 | 75 | 90 | 7.03 | 280/260 | CT | 170 | 7.05 |
| S | 400 | 90 | 80 | 95 | 10.8 | 360 | CT | 180 | 14.5 |
Specification and technical data of Conveyor Belt
|
|
|
| Strength(N/mm) | Cover thick (mm) |
|
| ||||||
|
|
|
|
|
|
|
|
| |||||
|
|
| EP-100 | 0.75 | 200 | 300 | 400 | 500 | 600 | 1.5~12 | 0~4.5 | 400~2500 | ≤300 |
EP-150 | 0.8 | 300 | 450 | 600 | 750 | 900 | |||||||
EP-200 | 0.9 | 400 | 600 | 800 | 1000 | 1200 | 500~2500 | ||||||
EP-250 | 1.15 | 500 | 750 | 1000 | 1250 | 1500 | |||||||
EP-300 | 1.25 | 0 | 900 | 1200 | 1500 | 1800 | |||||||
EP-400 | 1.45 | 0 | 0 | 1600 | 2000 | 2400 | 800~2500 | ||||||
EP-500 | 1.55 | 0 | 0 | 2000 | 2500 | 3000 | |||||||
Check: The belt edges, Sidewalls, Cleats and the belt splice need to be checked on a periodic basis for wear or separation. Any minor areas of damage should be repaired as soon as is possible.