2lpe 3lpe Gas Oil Water Steel Pipe Pipeline Field Joint Coating Insulation PE Polyethylene Adhesive Heat Shrink Shrinkable Sleeve

China 2lpe 3lpe Gas Oil Water Steel Pipe Pipeline Field Joint Coating Insulation PE Polyethylene Adhesive Heat Shrink Shrinkable Sleeve, Find details about China Shrink Sleeve, Heat Shrinkable Sleeve from 2lpe 3lpe Gas Oil Water Steel Pipe Pipeline Field Joint Coating Insulation PE Polyethylene Adhesive Heat Shrink Shrinkable Sleeve

Basic Info.

Model NO.

HSD

Structure

Polyethylene+Adhesive

Operating Temperature

60c

Trademark

HSD

Transport Package

by Order

Specification

450, 500, 600, 650

Origin

Qingdao China

HS Code

3920999090

Model NO.

HSD

Structure

Polyethylene+Adhesive

Operating Temperature

60c

Trademark

HSD

Transport Package

by Order

Specification

450, 500, 600, 650

Origin

Qingdao China

HS Code

3920999090

Product Desciption

2lpe 3lpe Gas Oil Water Steel Pipe Pipeline Field Joint Coating Insulation PE Polyethylene Adhesive Heat Shrink Shrinkable Sleeve

INTRODUCTION
PE heat shrinkable sleeve has a two-layer structure, it is composed of radiation cross-linked polyethylene backing and special heat melt adhesive. The shrink sleeve should be applied together with non-solvent two component epoxy primer.
Heat melt adhesive has good bonding with PE backing, steel pipe and epoxy primer. By heating PE back shrinks, adhesive layer melts, the sleeve closely wraps around the pipe joints. It forms together with the epoxy primer a firm and continuous anti-corrosion body, which is similar to the 3-layer anticorrosive coating in factory conditions. It is resistant to corrosion, wear, impact, UV and aging, easier to be operated.

Application area:
It is mainly used for field joint coating, wrapping around pipes, anti-corrosion of kinds of pipe joints, and repairing pipes.
For example Oil and gas pipe, PU insulation pipe, 3LPE/2LPE steel pipe.

Field joint coating of steel pipe with 3LPE coating
2lpe 3lpe Gas Oil Water Steel Pipe Pipeline Field Joint Coating Insulation PE Polyethylene Adhesive Heat Shrink Shrinkable Sleeve

Sealing pre-insulated pipe
2lpe 3lpe Gas Oil Water Steel Pipe Pipeline Field Joint Coating Insulation PE Polyethylene Adhesive Heat Shrink Shrinkable Sleeve

Connecting and sealing drain pipes
2lpe 3lpe Gas Oil Water Steel Pipe Pipeline Field Joint Coating Insulation PE Polyethylene Adhesive Heat Shrink Shrinkable Sleeve

Feature of heat shrinkable sleeve HSD:
1.fast shrinkage speed,
2.good waterproof performance,
3 good anti-corrosive performance,
4.long service life

5.using pure PE material and imported adhesive for ensuring the quality

TECHNICAL PARAMETERS

NO	Test Item			Unit	Performance	Test Result	Test Method
Back Material
1	Tensile Strength			MPa	≥17	19.47	ASTM D638
2	Elongation			%	≥400	626	ASTM D638
3	Vicat Softening Point			ºC	≥90	92	ASTM D1525
4	Brittleness Temperature			ºC	<-65	<-65	ASTM D2671C
5	Dielectric Strength			MV/m	≥25	33.13	ASTM D149
6	Volume Resistivity			Ω.m	≥1*10¹³	1.1*10¹³	ASTM D257
7	Environment Stress Crack			h	≥1000	>1000	GB/T1842
8	Chemical resistance (7d)	10% HCI	Tensile strength	MPa	≥85	104.9	ASTM D638
		10% HCI	Elongation	%	≥85	96.3	ASTM D638
		10% Naah	Tensile strength	MPa	≥85	102.1	ASTM D638
		10% Naah	Elongation	%	≥85	95.6	ASTM D638
		10% NaCl	Tensile strength	MPa	≥85	108.3	ASTM D638
		10% NaCl	Elongation	%	≥85	94.1	ASTM D638
9	Thermal aging (150ºC,168h)		Tensile strength	MPa	≥14	20.7	ASTM D638
9	Thermal aging (150ºC,168h)		Elongation	%	≥300	630	ASTM D638

NO.	Test Item		Uni	Performance	Test Resul	Test Method
Adhesive
1	Softening Point		ºC	≥90	90.1	ASTM E28
2	Brittleness Temperatur		ºC	<-15	<-15	ASTM D2671C
3	Lap Shea		MPa	≥1.0	1.5	ASTM D1002
4	Peel Strength (23±2ºC	Steel	N/cm	≥70	145.6	ASTM D1000
		Primer	N/cm	≥70	205.9	ASTM D1000
		PE layer	N/cm	≥70	190.0	ASTM D1000
Non-solvent Epoxy Primer
5	Shear of cured primer		MPa	≥5.0	12	SY/T0041

Ordering information
Heat shrink sleeve is available:
·pre-cut sleeve and separate closure patch
·pre-cut sleeve with pre-attached closure patch
·tape in roll (closure patch to be ordered separately)
2lpe 3lpe Gas Oil Water Steel Pipe Pipeline Field Joint Coating Insulation PE Polyethylene Adhesive Heat Shrink Shrinkable Sleeve

Heat shrink sleeve workshop

2lpe 3lpe Gas Oil Water Steel Pipe Pipeline Field Joint Coating Insulation PE Polyethylene Adhesive Heat Shrink Shrinkable Sleeve

Heat shrink sleeve equipment
The is designed and manufactured independently by our company and we also sell the equipment.
Please click the link for more information.
2lpe 3lpe Gas Oil Water Steel Pipe Pipeline Field Joint Coating Insulation PE Polyethylene Adhesive Heat Shrink Shrinkable Sleeve