Products

Yks Series Water-Cooled High-Voltage 3-Phase Asynchronous Motor
Yks Series Water-Cooled High-Voltage 3-Phase Asynchronous Motor

Yks Series Water-Cooled High-Voltage 3-Phase Asynchronous Motor

China Yks Series Water-Cooled High-Voltage 3-Phase Asynchronous Motor, Find details about China Yks Motor, 10000V Motor from Yks Series Water-Cooled High-Voltage 3-Phase Asynchronous Motor

Model NO.
YKS5003-4-800KW
Number of Poles
4
Starting Mode
Direct on-line Starting
Certification
ISO9001, CCC, Ce
Brand
China Motor
Voltage
3kv.3.3kv.6kv.6.6kv.10kv.11kv
Protection Rating
IP44 or IP54,IP55
Nsulation Class
F
Output Power
800kw
Cooling Methodic611,IC616.IC666.IC81wdut
IC611,IC616.IC666.IC81W
Duty
S1
Frequency
50Hz/60Hz
Stator Winding
100% Copper Wire
Driving
Pump, Air Compressor,Cone Crusher
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
Model NO.
YKS5003-4-800KW
Number of Poles
4
Starting Mode
Direct on-line Starting
Certification
ISO9001, CCC, Ce
Brand
China Motor
Voltage
3kv.3.3kv.6kv.6.6kv.10kv.11kv
Protection Rating
IP44 or IP54,IP55
Nsulation Class
F
Output Power
800kw
Cooling Methodic611,IC616.IC666.IC81wdut
IC611,IC616.IC666.IC81W
Duty
S1
Frequency
50Hz/60Hz
Stator Winding
100% Copper Wire
Driving
Pump, Air Compressor,Cone Crusher
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090

Yks Series Water-Cooled High-Voltage 3-Phase Asynchronous Motor
YKS series (10KV) high voltage motor is a squirrel-cage rotor water-cooled three-phase asynchronous motor. This type of motor has advanced technology, high efficiency, low noise, low vibration, reliable operation, convenient installation and maintenance. The power class, installation dimensions and electrical performance of this series of motors are in compliance with the relevant provisions of the IEC standard.
The YKS series (10KV) high-voltage water-cooled motor is welded into a box-shaped structure to strengthen the rigidity of the 45° position of the frame. An air-water cooler is arranged above for heat exchange, and the stator coil is double-wound flat copper wire with a F-grade polyimide film, and the heat resistance and electric strength are improved. The core is made of non-oriented cold-rolled silicon steel sheet, and the loss per unit volume is greatly reduced. The stator core is press-fitted to facilitate the welt and overall dipping. The rotor is a shaft welded rib structure, which strengthens the rigidity of the shaft and increases the air inlet area of the rotor. The squirrel cage rotor adopts a reliable cast aluminum process.
The YKS series (10KV) water-cooled high-voltage motor allows direct start at full pressure. From the end of the shaft, the motor is turned clockwise or counterclockwise. The YKS high voltage three-phase asynchronous motor has a protection rating of IP44 or IP54 and a cooling method of ICW81A.
 YKS series (10KV) high voltage AC motors can be used to drive a variety of different machines. Such as ventilators, compressors, pumps, crushers, cutting machine tools and other equipment, and can be used for prime movers in coal mines, machinery industry, power plants and various industrial and mining enterprises.
Yks Series Water-Cooled High-Voltage 3-Phase Asynchronous Motor
Center height range: H450 ~ 630mm
Power range: 220kW~2500kW
Number of poles: 2/4/6/8/10/12
Rated voltage: 10000V/11000V
Rated frequency: 50HZ/60HZ
Protection level: IP44 or IP54
Insulation class: F
Work system: S1 (continuous)
Cooling method: IC81W
Installation form: IMB3
Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)
Altitude: no more than 1000m
This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).
Yks Series Water-Cooled High-Voltage 3-Phase Asynchronous Motor
YKS series (10KV) water-cooled high-voltage motor adopts the internationally popular box structure. The base and end cover are made of steel plate welded with good rigidity and light weight. After removing the protective cover (or cooler), you can observe and touch the inside of the motor to facilitate the installation and maintenance of the motor. The stator adopts an external press-fit structure. The stator windings are made of Class F insulation material and anti-corona material. The winding ends are fixed by a special lashing process, which is firm and reliable. The whole stator is treated with vacuum pressure impregnated Class F solventless paint (VPI). Thus, the motor has excellent and reliable insulation properties and moisture and impact resistance.
Yks Series Water-Cooled High-Voltage 3-Phase Asynchronous Motor
Yks Series Water-Cooled High-Voltage 3-Phase Asynchronous Motor
There are many types of motor products manufactured and sold by our company. The main products are high- and low-voltage three-phase asynchronous motors. The motor structure types include squirrel-cage type and winding type. Among them, high-voltage synchronous motors mainly support air compressors and mine ball mill equipment. use. We adhere to the service tenet of "focus on products, service with heart" and provide high-quality motor products to customers.
Yks Series Water-Cooled High-Voltage 3-Phase Asynchronous Motor
Yks Series Water-Cooled High-Voltage 3-Phase Asynchronous Motor
The company has large-scale laboratory, intelligent CNC winding machine, CNC rising machine, automatic wrapping machine, VPI high pressure vacuum immersion system, large-scale dipping paint drying furnace, 60 tons test platform, large vertical car, milling machine, grinding machine, Each type of dynamic balancing machine, double-feedback test and detection system with 6MW (12MW) motor and other motor production professional equipment more than 500 sets, sound mechanical equipment processing capacity, to lay a good foundation for customers to improve good quality motor products.
Yks Series Water-Cooled High-Voltage 3-Phase Asynchronous Motor
Yks Series Water-Cooled High-Voltage 3-Phase Asynchronous Motor
More details, welcome to call us!
Q: What are the payment terms?
A: 30% T/T in advance, 70% before shipment
Q: What is your delivery time?
A: Different models with different time, 10-90 days after order confirmed.
Q: What is your MOQ?
A: It depends on model.
Q: Where is your loading port?
A: Shanghai or Tianjing Port, China.

 

You Might Also Like