Liugong Clg425 Cheap Price 15070kg 135HP Motor Grader

Products

Liugong Clg425 Cheap Price 15070kg 135HP Motor Grader

China Liugong Clg425 Cheap Price 15070kg 135HP Motor Grader, Find details about China Motor Grader, Road Grader from Liugong Clg425 Cheap Price 15070kg 135HP Motor Grader

Basic Info.

Model NO.

CLG4165

Product Nmae

Liugong Clg4165 Top Brand 15000kg 3960mm Blade Mot

Weight

15000kg

Blade Width

3660mm

Trademark

CCC ISO9001

Transport Package

Nude

Specification

160(215)@2200kw

Origin

China

HS Code

84295100

Model NO.

CLG4165

Product Nmae

Liugong Clg4165 Top Brand 15000kg 3960mm Blade Mot

Weight

15000kg

Blade Width

3660mm

Trademark

CCC ISO9001

Transport Package

Nude

Specification

160(215)@2200kw

Origin

China

HS Code

84295100

Product Desciption

LIUGONG Top Brand Motor Grader

Fuel Efficient Dongfeng Cummins Engine.
Low Vibration, Noise, Dust +UV Resistant cab
Meritor wet axle with "no-spin" differential lock as standard
Balance box enables the 4 rear wheels to swing up and down by +/- 15°

I. Parameters

Engine		DCEC 6CTAA8.3-C215
Rated Power	(kW)	160(215)@2200
Blade Width	mm(inches)	3960(156)
Maximum Speed	Km/h (mph)	40.3 (25)
Draw Bar Pull	(kN)	86
Operating Weight	Kg(Lb)	16500(36376)
ENGINE
Tier		II
Make		Dongfeng Cummins
Gross Power	KW(HP)@rpm	160(215)@2200
Net Power	KW(HP)@rpm	144(195)@2200
Peak Torque		908N. M/1500rpm
Torque Rise %		31%
Number of Cylinders		6
Aspiration		Turbo air-to-air aftercooled
TRANSMISSION
Transmission Type		Power shift
Transmission Configuration		6f/3r
Torque Converter		Three-member single turbine
Maximum Travel Speed, fwd	(km/h)	42 (25.8)
Maximum Travel Speed, rev	(km/h)	25.6 (15.9)
Number of Speeds, fwd		6
Number of Speeds, rev		3
AXLES
Front Axle Make		LiuGong Weld axle
Rear Axle Make		Meritor
Differential Type		No-spin limited slip standard
Final Drive Type		Chain drive
Axle Oscillation		±15°
Front Axle Type		All welded steel frame
Front Axle, Wheel Lean Angle		±17°
STEERING
Steering Configuration		Load sensor steering gear
Steering Relief Pressure	(MPa)	17
Minimum Turning Radius	(inches)	8000(315)
Steering Angle		±45°
Frame Articulation Angle		±20°
BRAKES
Service Brake Type		(Dry)shoe
Service Brake Location		Rear axle only
Service Brake Actuation		Hydraumatic
TIRES
Tire Size		17.5-25 PR12/L3
HYDRAULIC SYSTEM
Main Pump Type		Gear
Main Relief Pressure	(MPa)	18
Pilot Pump Flow	L(Gal)/min	126(33)
WORKING CAPACITIES
Maximum Draw Pull	(kN)	90
Cutting Pressure	Kg(Lb)	8100(17857)
TANDEM DRIVE PERFORMANCE
Height	mm(inches)	600(24)
Width	mm(inches)	210(8)
Thickness, inner wall / outer wall	mm(inches)	20/20(0.8/(0.8)
Center Distance	mm(inches)	1538(61)
Oscillating Angle		±15°
MOLDBOARD PERFORMANCE
Bank Cut Angle		40~70
Moldboard Lift Above Ground	mm(inches)	405(16)
Moldboard Side Shift, right / left	mm(inches)	725/675(29/27)
Maximum Sloping Angle		90°
Cutting Depth	mm(inches)	600(24)
Circle Rotation		360°
Circle Diameter	mm(inches)	1455(57)
Circle Thickness	mm(inches)	140(6)
DIMENSIONS
Wheelbase	mm(inches)	6230(245)
Overall Length	mm(inches)	8971(353)
Overall Height with Cab		3438(135)
Overall Width	mm(inches)	2600(102)
Clearance under Front Axle	mm(inches)	645(25)
Moldboard Standard Length	mm(inches)	4270(168)
Moldboard Standard Thickness	mm(inches)	19(0.7)
Moldboard Standard Height	mm(inches)	650(24)
OPERATING WEIGHTS
Operating Weight	Kg(Lb)	16500(36376)
On Front Wheels	Kg(Lb)	4700(10362)
On Rear Wheels	Kg(Lb)	11800(26015)
SERVICE CAPACITIES
Fuel Tank	L(Gal)	230(61)
Engine Oil	L(Gal)	22(6)
Cooling System	L(Gal)	45(12)
Hydraulic Reservoir	L(Gal)	186(49)
Transmission And Torque Converter	L(Gal)	45(12)
Tandems, Each	L(Gal)	28(7)

II. Overall View

III. Our Company

You Might Also Like