UAC120 ultrasonic atomizing spray system

        Optional atomizer  

Introduction to Ultrasonic Spraying System

Ultrasonic plane spraying equipment is a spraying equipment developed for glass, thin film battery, touch screen, fuel cell, etc. It has the characteristics of high spraying efficiency, low flow rate (controllable), uniform spraying layer, small atomized particles and heating. Compared with traditional spraying methods such as high-pressure spraying, ultrasonic flat spraying equipment can control the spraying speed and flow rate, so there is no waste phenomenon such as sputtering during spraying, which can save 80% of solution, reduce production cost and reduce environmental pollution ring.

Energy application

The fuel cell

The ultrasonic planar spraying equipment to make the coating of the fuel cell membrane can reduce the loss of the coating, reduce the environmental pollution, control the intensity of the atomization, and the quality of the atomized coating. Therefore, ultrasonic spraying advocated by Chifei Ultrasonic can be used as a method for preparing fuel cell film.

Solar battery

Ultrasonic planar atomization spraying equipment sprays a uniform film and a large thickness, so that the solar cell has a high light absorption rate, a light energy conversion rate, and a current density.

Thin film battery

Ultrasonic spraying method is simple in operation, the slurry is not easy to waste, the thickness of the film can be controlled, and the equipment cost is low, which has great application value for a wide range of promotion. Another advantage of the ultrasonic spray method is that the amount of binder in the slurry is reduced.

Material application

Granulation / spray drying

Most of the time the solid particle mixture can be atomized by ultrasonic atomizing equipment, solid particles will be dispersed in the atomizing liquid under the action of ultrasonic, and can also be atomized at low speed to the nozzle. Ultrasonic atomizing and granulating equipment can be used for powder milling and drying in a short time with high temperature drying furnace.

Ink / paint

Ultrasonic spray (atomization) is the use of ultrasonic energy to disperse water or liquid, forming a few microns to more than 100 microns of the size of small particles. All kinds of coatings, chemical reagents, lubricants, particle suspensions and so on can be atomized.

Application of electronic industry

Touch screen

The film solvents needed by the ultrasonic spraying equipment are transferred to the atomizing head through the liquid channel of the ultrasonic spraying equipment. The film solvents are dispersed to micron particles by ultrasonic action and high frequency oscillation. The spraying range is controlled by aeration so that the film solvents can be uniformly and shapely attached to the glass substrate. Material, the film prepared by this method has high adhesion, and the image of the display prepared by this method is clearer than that by ordinary hard film method.

Glass

The glass film prepared by ultrasonic atomizing spray equipment is uniform and compact, and its film is in good working condition. In addition, the preparation process of ultrasonic atomization spray equipment is low in cost, high in preparation efficiency and large in output. With the increasing use of ultrasonic spraying equipment, discolored glass, refractive glass and so on will play an important role in life.

Characteristics of ultrasonic spraying system

Multiple atomizing heads optional

Spray stability

Atomized particles reach microns.

The coating is uniform and dense.

There will be no blockage in long term use.

It is independent of the viscosity of the treated liquid.      

Main parameters

Pictures: