Pulp Consistency Transmitters

China Pulp Consistency Transmitters, Find details about China Blade Consistency Transmitter, Rotating Consistency Transmitter from Pulp Consistency Transmitters

Model NO.
HT181
Trademark
HUATAO
Origin
China
HS Code
84399100
Model NO.
HT181
Trademark
HUATAO
Origin
China
HS Code
84399100
 Blade Consistency Transmitter
Tybe1:
RC81 Technical Parameters:
1. Working range: 1~16% concentration (according to measuring components)
2. Sensitivity: better than ±0.005%
3. Measurement accuracy: close to sensitivity under stable conditions
4. Damping time: 1~100S
5. Maximum working pressure: 1MPa, 80°C shell: cast aluminum
6. Contact medium part: stainless steel
7. Motor: 3-phase 380VAC, 370W, IP54
8. Analog signal output: 4~20mA, load 0~750

Pulp Consistency Transmitters

Main Features:
1. Liquid crystal display, which can realize multi-point, parabolic calibration and easy to operate calibration;
2. Signal damping and filtering are very low, signal to noise ratio is high, and has high precision;
3. Not affected by pulp, fiber type, freeness, Kappa number, flow rate, pressure, etc.;
4. It is little affected by pH and temperature, and the temperature can be compensated;
5. Unaffected by pressure, air bubbles and electrical conductivity;
6. Fast response, short reaction time and control dead time, and good controllability;
7. It can be installed on horizontal, vertical or inclined pipes. The sensor shaft should be horizontal and the motor should be under the sensor.

Type 2 :
External Rotary Electronic Online Pulp Consistency Transmitter 
 
External rotary pulp concentration Transmitter is mainly composed of controller, external spin concentration sensor, 
measuring bucket, diluted water valve, four parts


Specification:
Measuring range :1%---6%

Working environment : up to 60
application :
Long fiber pulp components :Stainless steel 304
principle : Pulp shear force power:220v
accuracy :0.02%
Sensor power:380v
sensitivity :up to 0.01%
Analog signals :4-20mA
Repeat accuracy :0.2%
Digital signal :RS422
cycle :1s-20s
ratio :0----100
Pulp Consistency Transmitters