Products

Yrkk Series Large Size Winding Motor
Yrkk Series Large Size Winding Motor

Yrkk Series Large Size Winding Motor

China Yrkk Series Large Size Winding Motor, Find details about China Winding Motor, Yrkk Motor from Yrkk Series Large Size Winding Motor

Model NO.
YRKK710-1000
Number of Poles
4/6/8/10/12
Starting Mode
Serial Rotor Resistance Starting
Certification
ISO9001, CCC
Brand
China Motor
Voltage
3kv/6kv/6.6kv/10kv/11kv
Protection
IP44 or IP54,IP55
Nsulation Class
F
Output Power
800kw-5000kw
Cooling Method
IC611/IC616
Duty
S1
Frequency
50Hz/60Hz
Stator Winding
100% Red Copper
Rotor Winding
100% Red Copper
Driving
Steel Rolling Mill, Cement Mill,Sugar Rolling Mill
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
Model NO.
YRKK710-1000
Number of Poles
4/6/8/10/12
Starting Mode
Serial Rotor Resistance Starting
Certification
ISO9001, CCC
Brand
China Motor
Voltage
3kv/6kv/6.6kv/10kv/11kv
Protection
IP44 or IP54,IP55
Nsulation Class
F
Output Power
800kw-5000kw
Cooling Method
IC611/IC616
Duty
S1
Frequency
50Hz/60Hz
Stator Winding
100% Red Copper
Rotor Winding
100% Red Copper
Driving
Steel Rolling Mill, Cement Mill,Sugar Rolling Mill
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
Yrkk Series Large Size Winding Motor
The wound rotor motor is a slip ring three-phase asynchronous motor. The power rating, installation dimensions and electrical performance of this type of motor comply with the relevant IEC standards. The basic installation method of the motor is the horizontal bottom angle (IMB3), the working system is the continuous working system (S1), and the wound rotor is made of Class F insulation material.
The winding rotor motor has two types of bearings: rolling bearing and sliding bearing, depending on the motor power and speed. The rated frequency of the motor's power supply is 50Hz, the rated voltage is 6000V/10000V, and the basic type of protection is IP54. The motor slip ring housing can be protected to IP22 or IP23. Other voltage, frequency and degree of protection motors are also available upon request.
Wound rotor motors can be used to drive a variety of different machinery, such as compressors, pumps, crushers, cutting machine tools, transportation machinery and other mechanical equipment, in mining, machinery industry, petrochemical industry, power plants and other industrial and mining enterprises. Used as the prime mover. The motor used to drive the blower, coal mill, rolling mill and winch should indicate the purpose and technical requirements when ordering, and adopt special design to ensure reliable operation.
Yrkk Series Large Size Winding Motor
Center height range: H355 ~ 1000mm
Power range: 220kW ~ 10000kW
Number of poles: 2/4/6/8/10/12
Rated voltage: 3000V/6000V/6600V/10000V/11000V
Rated frequency: 50HZ/60HZ
Protection level: IP54 or IP55
Insulation class: F
Work system: S1 (continuous)
Cooling method: IC611/IC616
Installation form: IMB3
Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)
Altitude: no more than 1000m
This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).
Yrkk Series Large Size Winding Motor
The wound rotor motor is a slip-surrounding three-phase asynchronous motor, which can increase the starting torque at a small starting current. The motor is suitable for applications where the capacity of the feeder line is insufficient to start the squirrel-cage rotor, the starting time is long, the starting is frequent, and the small-range speed regulation is required. This series of motors has the advantages of high efficiency, energy saving, low noise, low vibration, light weight, reliable performance, convenient installation and maintenance.
Yrkk Series Large Size Winding Motor
Yrkk Series Large Size Winding Motor
The motor products manufactured by our company have obtained the ISO9001 quality management management system certification, passed the CCC/COC, China energy-saving product certification, and passed the certification certificates of CE/UL/IRIS/CAS and other European and American countries. The company strictly improves the quality and efficient motor products and services for users in strict accordance with the requirements of relevant product standards.
Yrkk Series Large Size Winding Motor
Yrkk Series Large Size Winding Motor
Main process flow of the motor
Motor stator: casing processing → punching press → iron core seating → coil making → weaving → dipping paint drying
Electronic rotor: blank shaft processing → iron core press installation → iron core cast aluminum → rotor string shaft → weave → dipping paint drying → dynamic balance
Motor assembly: stator rotor assembly → machine test → motor appearance coloring → packaging storage
Yrkk Series Large Size Winding Motor
Yrkk Series Large Size Winding Motor
ZCL Electric Motor Technology Co., Ltd. is a company mainly engaged in the manufacture, research and development and sales of motor products. The company has many types of motor products, including IEC standard motors. It is a professional IEC motor manufacturer. Related motor products have passed the product certification in China, the United States, Canada, Europe, the Middle East and other regions, and the products are exported to all over the world. Companies adhere to the "focus on products, service" business philosophy, is committed to improving the quality of safe motor products and services for customers around the world.
Yrkk Series Large Size Winding Motor
 

You Might Also Like