China 9V Battery Lead Copper Clamp Electrical 9 Volt Wire 12V Connector Quick Connect SAE Plug to Alligator Clip Power Cable, Find details about China Battery Cable, SAE Cable from 9V Battery Lead Copper Clamp Electrical 9 Volt Wire 12V Connector Quick Connect SAE Plug to Alligator Clip Power Cable
Product Name | Battery Alligator Clip to SAE Connector 16 Gauge 2 Pin Quick Disconnect Cable SAE to Battery Clamp Cable |
Material | PVC + Copper |
Connector 1 | SAE 2 Pin Connector |
Connector 2 | Alligator Clips |
Cable Gauge | 16AWG, 18AWG |
Rated Voltage | 12V-24V |
Rated Current | 30A, 20A, 10A |
Length | 1m, 2m, 3m, 4.5m, 5m, 10m (Customized) |
Application | Widely used in a variety of batteries, solar panels, motorcycles, lawn mowers, ATV, RV, boat, trolling motors, tractors and other equipment that requires SAE plugs. |
Package | Carton size: 60x40x30cm, 200pcs/ctn |
9v Battery Lead Copper Clamp al 9 Volt Wire 12v Connector Quick Connect Sae Plug to Alligator Clip Power Cable
Features:
Type: SAE To Alligator
With Fuse, heat and corrosion resistant that well works at wide voltage range of DC 12-24V, good for most of vehicle
With Weatherproof Cover Design: Easily snapped on to ensure the USB charging port water resistant and dustproof
You can not only directly powered by the existing SAE outlet of your motorcycle but also get power from the battery by connecting to crocodile clips cable
SAE Connector to Alligator Clips :
Molded 45P PVC Black
Molded PE Transparent
Female Bullet Terminal: 4.57mm Rec, Nickel Plated Brass
Male Bullet Terminal: 4.57mm Pin, Nickel Plated Brass
Alligator Clips :
Alligator clip: - signed, Nickel Steel With Black Insulated-Grip, Rating: 30A
Alligator clip: + signed, Nickel Steel With Red Insulated-Grip, Rating: 30A
Fuse case :
Molded PVC Black 45P
Molded PE Transparent
Female Bullet Terminal: 4.57mm Rec, Nickel Plated Brass
Male Bullet Terminal: 4.57mm Pin, Nickel Plated Brass
Cable :
SPT-2 16AWG/2C
Length: 0.6m
Color: Red/Black
OD: 3.7*7.4mm
Note:
All cables are 100% tested: Any open, miswiring&shot are not permitted.
Withstanding voltage: DC 300V AT 10ms.
Insulation resistance: 5M Ohm(min)
Conductive resistance: 5 Ohm max.
All material must are RoHS Compliance