4 mm Building Material Modified Bitumen SBS Waterproof MembraneDescriptionSBS/APP modified bitumen waterproof membrane is made of bitumen modified with Styrene-Butadiene- Styrene (SBS) or Atactic-polypropylene as dipping and painting. Its upper surface covers PE membrane and color sand or schist, and lower surface is made of PE membrane or sand. Product types include normal SBS/APP, root resistance series, and mineral series.
Feature & Benefit1. It has good waterproofing and aging-resistance function.
2. Not flowing in high temperature and no crack in low temperature.
3. It has long service life,etc. It is specially suitable to the high temperature area and strong sun-shining area.
4. All seasons can be constructed.
Main ApplicationIt is widely used for the waterproof, damp-proof and seepage-proofing of roof, basement, tunnel, underground building, etc..
Application GuidanceWidespread paving membrane: On the treated substrate, leave the lap seam (100mm for both long and short sides) according to the width of the membrane. Make the snap line and pave the membrane according to the datum line. The paving should be even and straight. The size of the overlapping should be correct metered and no distorting
Using torch-applied full boding method. In the course of paving, firstly bond the initial edge strongly then execute the reciprocating heating by flame heater whose nozzle is kept 0.3-0.5m from the membrane and the substrate heated position. Do not keep the flame at the same place for long time, or else it will cause the felt exposed or peeling. The heating should be even. Avoid overheating and burning the membrane. Roll the membrane to pave till the membrane surface is black glossy and within tiny bubble (not big amounts of bubble). Arrange one personnel to implement the venting and firming procedures
Lap seam treatment: Use blowtorch to heat the top membrane's bottom and the bottom membrane's surface fully. Make sure the tight bonding of the asphalt between membranes. The melting asphalt will be extruded from the edge, forming 2-5mm width uniform asphalt stripe
| Technical Data Sheet |
| Implement Standard: GB/T18243-2008 | |
| NO. | Item | Standard | Result |
| 1 | Heat resistance,ºC | 110ºC,no flowing,no dripping | Pass |
| 2 | Elongation at break,%≥ | 25 | 30 |
| 3 | Low temperature flexibility,ºC≤ | -7ºC no cracking | Pass |
| 4 | Water tightness 0.3MPa 120min | Watertight | Pass |
| 5 | Tension,N/50mm≥ | 500 | 545 |
| 6 | Soluble substance content(g/m2)≥ | 2100, Filler base is non-combustible | 2225 |
Thickness
(mm) | Width
(m) | Length
(m) | Remark |
| 3 | 1 | 10 | or customized as required |
| 4 | 1 | 10 |
| 5 | 1 | 7.5 |
Do not store product exposed to weather and sun. When kept in a cool, dry and protect area, sealed pail have a 12-months shelf life.
Storage & TransportationDifferent types and sizes of materials shall be stored separately, keep in sequence and avoid mess; Store materials in dry and ventilated condition, protect from sunshine, rain or other extreme environment; Storage temperature shall be less than 45ºC, the max height of stack is 5 layers. Prevent squeezing against membranes during transit, provide cover on top if necessary.