China Smart Lte 800MHz Mobile Signal Booster Cell Phone Signal Repeater for 4G, Find details about China Mobile Signal Repeater, Mobile Signal Booster from Smart Lte 800MHz Mobile Signal Booster Cell Phone Signal Repeater for 4G
GlobaL application ATNJ factory DCS 1800MHZ 2g 4g signal repeater 2 colors for your selection:
DCS 1800MHZ 2g 4g Pico repeater is applied specifically in small area indoor DAS system. The base station signal is coupled and amplified by Pico repeater into in building system. The amplified signals is transmitted by indoor antenna. Meanwhile the indoor antenna receives the cell phone signal, and send the signal to the base station as uplink. This method can eliminate the signal dead spot, reject the interference, provide the stable signal communication for cell phone users. This Pico repeater mainly solves the problem spot problem in building. The coverage area is as large as 3000 square meters in open space, and 1000 square meters in partial obstacle area, 500 square meters in complete obstacle area. The edge power level for coverage area is above 85dBm. The repeater output power level is less than 20dBm.
Pico Repeater is a bi-directional amplifier that allows for the reception of signals, amplifies the signal and re-transmits into areas where there is no or very low signal level coverage enabling a mobile user to establish a call connection.
Pico Repeater can be deployed in indoor coverage and dead area. It is especially advantageous to use in 100M2-1000M2,which is a very economical solution. The output power is up to 20dBm per carrier.
Meanwhile, it can also boost the speed of GPRS.
CDMA/GSM 800MHZ | PCS1900MHZ | GSM900 MHZ | DCS1800 MHZ | 3G2100MHZ | |
UL824-849MHz DL869-894MHz
| UL1850-1910MHz DL1930-1990MHz | UL890-915MHZ DL935-960MHZ | UL1710-1785MHZ DL1805-1880MHZ | UL1920-1980MHZ DL2110-2170MHZ | |
Gain | >65dB | ||||
Automatic Gain Control( AGC) | >30dBm | ||||
Noise Figure | >4dB | ||||
Gain Flatness | >5dB (p-p), | ||||
Automatic Gain Control (1dB step) | 30dB in step of 1dB (Auto) | ||||
Maximum Output Power | UL10-20dBm DL15-27dBm | ||||
Input power range | -55 dBm~-15 dBm | ||||
Intermodulation Products | 9KHz~1GHz | -36dBm @ 3KHz | |||
1GHz~12.75GHz | -30dBm @ 3KHz | ||||
Spurious Emission | 9KHz~1GHz | -36dBm @ 3KHz | |||
1GHz~12.75GHz | -30dBm @ 3KHz | ||||
Group Delay | UL 1μs | ||||
AC POWER | AC 95-250V | ||||
Adapter output power | DC5.0V | ||||
Temperature range | -25ºC~+55ºC | ||||
Relative humidity | ≤80% | ||||
RF interface | SMA-F | ||||
Power interface | KLD-35-13 | ||||
Weight | ≤0.3kg | ||||
Size | 160×100×27mm |