Products

SA 815 Butt Weld End Cap Super Duplex Stainless Steel Fittings F53 / S32750

China SA 815 Butt Weld End Cap Super Duplex Stainless Steel Fittings F53 / S32750, Find details about China Super Duplex Stainless Steel, S32750 from SA 815 Butt Weld End Cap Super Duplex Stainless Steel Fittings F53 / S32750

Model NO.
SA 815 Cap Super Duplex Pipe Fittings UNS S32750
Manufacturing Way
Forging
Trademark
ABOOM
Transport Package
Comply with International Shipping Standards
Specification
1/2"-80", DN6-DN2400
Origin
China
HS Code
730721
Model NO.
SA 815 Cap Super Duplex Pipe Fittings UNS S32750
Manufacturing Way
Forging
Trademark
ABOOM
Transport Package
Comply with International Shipping Standards
Specification
1/2"-80", DN6-DN2400
Origin
China
HS Code
730721

1.Specification:
SA 815 Butt Weld End Cap Super Duplex Stainless Steel Fittings F53 / S32750
Product Details
Product name

SA 815 Butt Weld End Cap Super Duplex Stainless Steel Fittings F53 / S32750

Brand nameABOOM
StandardASTM A312, ASTM A554, ASTM A790, EN10216-5, EN10217-7, JIS G3468, JIS G3459 ANSI B16.5, ANSI B16.47
Material300 series: 301,303/Cu,304/L/H,304Cu,305,309/S,310/S,316/L/H/Ti,321/H,347/H,330,
400 series: 409/L,410,416/F,420/F,430,431,440C,441,444,446,
600 series: 13-8ph,15-5ph,17-4ph,17-7ph(630,631),660A/B/C/D,
Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760,2304,LDX2101.LDX2404,LDX4404,904L
Others: 254SMo,253Ma,F15,Invar36,1J22,N4,N6 etc
Alloy : Alloy 20,Alloy 28,Alloy 31;
Hastelloy: Hastelloy B / B-2,Hastelloy B-3,Hatelloy C22,Hastelloy C-4,Hastelloy S,
Hastelloy C276,Hastelloy C-2000,Hastelloy G-35,Hastelloy G-30,Hastelloy X, Hastelloy N;
Haynes: Haynes 230,Haynes 556,Haynes 188;
Inconel: Inconel 600,Inconel 601,Inconel 602CA,Inconel 617,Inconel 625,Inconel 718,Inconel X-750,Carpenter 20;
Incoloy: Incoloy 800 / 800H / 800HT,Incoloy 825,Incoloy 925,Incoloy 926
GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044
Monel: Monel 400,Monel K500
Nitronic: Nitronic 40,Nitronic 50,Nitronic 60;
Nimonic: Nimonic 75,Nimonic 80A,Nimonic 90 ;
Outer Diameter1/2"-80", DN6-DN2400
PressureCLASS 150LB -CLASS 3000LB
ApplicationPipeline and valves connection
TechnologyForged flange

 

 

National standards:

ASTM / ASME: A240-UNS S32750
EURONORM: 1.4410-X2 Cr Ni MoN 25.7.4
AFNOR: Z3 CN 25.06 Az
DIN / EN 1.4410, ASME SA-240


SA 815 Cap Super Duplex Pipe Fittings F53 / S32750 Size:

Outer diameter: 1/2 "-20" (DN15-DN500)
 
Wall thickness: Sch5S-Sch80S



Production standards: SA 815, GB / T13401, SH3408, SH3409; ASME / ANSI B16.9, B16.28,
ASTM A403, MSS SP-43; DIN 2605, DIN2609, DIN2615, DIN2616;
JIS B2311, JIS B2312, JIS B2313

 

 

General attributes:

 

S32750 Super Duplex stainless steel pipe has strong strength and corrosion resistance, and is mainly used in chemical processing, petrochemical and subsea equipment. It has strong resistance to chloride corrosion, higher thermal conductivity and lower coefficient of thermal expansion. Higher chromium, molybdenum and nitrogen content it has a high resistance to pitting, crevice corrosion and general corrosion.

 

Its impact strength is also very high. The S32750 alloy is not suitable for use at temperatures higher than 570 ° C. If it is exposed to such an environment for a long time, its toughness will decrease.

 

 

Mechanical properties Tensile strength: σb≥730Mpa Elongation: δ≥15%

Typical working conditions :30% dilute sulfuric acid, below 60 ºC, annual corrosion rate <0.1mm
 

2.

Chemical Composition(%) 
GradeCSiMnPSCrNiMoNCu
201≤0.15≤0.755.5~7.5≤0.060≤0.0316.00~18.003.5~5.5--0.081.5
202≤0.15≤1.007.5~10.00≤0.060≤0.0317.00~19.004.0~6.0-≤0.25  
301≤0.15≤1.00≤2.00≤0.045≤0.0316.00~18.006.00~8.00-   
302≤0.15≤1.00≤2.00≤0.035≤0.0317.00~19.008.00~10.00-   
304≤0.07≤1.00≤2.00≤0.045≤0.0318.00~20.008.00~10.50-   
304L≤0.030≤1.00≤2.00≤0.045≤0.0318.00~20.009.00~13.00-   
310S≤0.08≤1.00≤2.00≤0.045≤0.0324.00~26.0019.00~22.00-   
316≤0.08≤1.00≤2.00≤0.045≤0.0316.00~18.0010.00~14.002.00~3.00   
316L≤0.03≤1.00≤2.00≤0.045≤0.0316.00~18.0012.00~15.002.00~3.00   
321≤0.08≤1.00≤2.00≤0.045≤0.0317.00~19.009.00~13.00-   
430≤0.12≤0.75≤1.00≤0.040≤0.0316.00~18.00
 		-   
2205≤0.03≤1.00≤2.00≤0.030≤0.01522.00~23.004.5~6.52.5~3.5   
2507≤0.03≤0.08≤1.20≤0.035≤0.01524.00~26.006.00~8.003.0~5.0   
904L≤0.02≤1.00≤2.00≤0.045≤0.03519.00~23.0023.00~28.004.0~5.0 1.0~2.0 
INCONEL
028		≤0.03≤1.00≤2.50≤0.030≤0.030≤28.0≤34.0≤4.0 ≤1.4 
MONEL
400		≤0.30≤0.5≤2.00-≤0.024-≥63.0- ≤34.0 
INCONEL
800		≤0.10≤1.00≤1.50-≤0.015≤23.0≤354.0~5.0-≤0.75Ti≤0.6
Al≤0.6  

Packaging & Shipping
Packaging DetailIn bundles with waterproof material, in wooden cases
Delivery Time20 days

SA 815 Butt Weld End Cap Super Duplex Stainless Steel Fittings F53 / S32750SA 815 Butt Weld End Cap Super Duplex Stainless Steel Fittings F53 / S32750
-- FAQ --

Q1:Are you factory or trading company?
A:We are professional manufacturer .

Q2:What are the advantages of your company?
A: We have many professional technical personnel.And we have more competitive prices and better after-sales service than trading companies.
 
Q3:How do you control the quality?
A:Our company is certificated to ISO9001:2008.We have many inspectors and every product will have been tested for 4-5 processes.
We welcome customers or the third party inspection agencies to come to our factory for inspection.
  
Q4:How long is your delivery time?
A:Different products have different delivery time.The products will be delivered as soon as possible on the basis 
of the quality assurance.Usually the delivery time is within 10-20 days after we recieved your desipot.

-- Contact US --
SA 815 Butt Weld End Cap Super Duplex Stainless Steel Fittings F53 / S32750
 

You Might Also Like