Products

Wlfc43-80, Rack Column Roll Forming Machine

China Wlfc43-80, Rack Column Roll Forming Machine, Find details about China Rack Column Roll Forming Machine, Shutter Door Roll Forming Machine from Wlfc43-80, Rack Column Roll Forming Machine

Model NO.
WLFC43-80
Coil Width
198
Roller Station
13-14
Power of Main Moter
4kw
Power of Hydraulic
3kw
Shaft Dia.
70mm
Material of Roller
#45
Material of Cutter
Cr12
HRC
58-60
Wall Plate THK
16mm
Trademark
WILLINGIN′T
Transport Package
Wooden Cases
Specification
CE& ISO9001
Origin
China
Model NO.
WLFC43-80
Coil Width
198
Roller Station
13-14
Power of Main Moter
4kw
Power of Hydraulic
3kw
Shaft Dia.
70mm
Material of Roller
#45
Material of Cutter
Cr12
HRC
58-60
Wall Plate THK
16mm
Trademark
WILLINGIN′T
Transport Package
Wooden Cases
Specification
CE& ISO9001
Origin
China
 WLFC43-80, Rack Column Roll Forming Machine
 1.The Subjects & Price
Wlfc43-80, Rack Column Roll Forming MachineWlfc43-80, Rack Column Roll Forming Machine
Name of Machine: Rack Column (Upright) Roll Forming Machine.
Model Number: WLFC25-30.
Price: US$49'000/ full set, FOB Shanghai.
Containers Required: Only one 40ft GP; length of two mainframes is 8+3m.
Note: Above is manual uncoiler (unpowered) and manual product run out table.

Components for the Machine
The roll forming machine includes 3tons manual uncoiler unit, sheet guiding equipment, straightening device, pre-punching device, roll forming system, cutting equipment, hydraulic station, electric controlling system(PLC) and run out supporting table.
Wlfc43-80, Rack Column Roll Forming Machine
Technical Parameters
Material specificationgalvanized steel and carbon steel.
Thickness1.5 mm to 2.0mm.
Main motor power7.5 kw.
Hydraulic station power5.5 kw.
Feeding width195mm.
Web width80mm.
Yield stress235Mpa (33KSI) ~ 345Mpa (50KSI).
Roll forming Speed12 m/minute.
Product Speed6 m/minute.
Cutting Tolerance+/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm).
Manual UncoilerMax. Capacity: 3000kgs.
Coil inner diameter508mm.
Voltage380V, 3 phase, 50 HZ.
Numbers of stationsabout 13 stations + rectifying rollers.
Type of cuttingRoll-formed and length-set profile cutting and punching.

Material of Main Equipment
Roller MaterialHigh grade S45C carbon wrought steel, diameter 80mm.
Electric ElementsPLC control console, touch screen and transducer, from Siemens, Germany.
Other elements, from Schneider, Germany.
Cutter bladesCr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.
Active Shaft MaterialHigh grade S45C carbon wrought steel, diameter 80mm.
Punching DieCr12 mould steel with quenching treatment.




 
Standard Equipment of Machine:
1Manual Uncoiler, 3-ton1set
2Infeed Guide1set
3Straightening Device1set
4Power Press, 40-ton1set
5Roll Forming Station1set
6Rectifying Device1set
7Hydraulic Station1set
8PLC Control Console1pc
9Cutter1set
10Product Support Table2pcs
11Spare Parts1box
 
We are a manufacturer in China
we can make the machine as per as your request.

About the machine,
we need you to provide us informaton,
1. profile drawing and size of product (model), 
2. steel thickness range,
3. coil width,
4. steel stress, 
5. requirements for configuration.

For price and other details, we welcome you to inquire us. 

Please Contact Miss. Lucy
 

You Might Also Like